Siglent SSA3000X Series Spectrum Analyzer

Frequency Range
9 kHz -3.2 GHz

Resolution Bandwidth
1 Hz ~ 1 MHz

Phase Noise
< -98 dBc/Hz
 

---

Product Introduction
SSA3000X series covers the frequency range from 9 kHz to 3.2 GHz, which is suitable for spectrum analysis from basic to mid-range.

Key Features

• Frequency Range from 9 kHz to 2.1/3.2 GHz
• -161 dBm/Hz Displayed Average Noise Level (Typ.)
• -98 dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)<
• <Amplitude Accuracy0.7 dB
• 1 Hz Minimum Resolution Bandwidth (RBW)

 

---

Product advantage

Economical Spectrum Analyzer with Excellent Performance
With their light weight, small size, and friendly user interface, the SSA3000X present a large, bright easy to read display, powerful and reliable automatic measurements, and plenty of impressive features. Applications include research and development, education, production, maintenance, and pre-compliance testing.

· Bandwidth 9 kHz to 2.1 GHz / 3.2 GHz, minimum resolution bandwidth 1 Hz
· Display average noise level below -161 dBm/Hz, full amplitude accuracy better than 0.7 dB
· Standard preamplifier, remote control instruction set, EasySpectrum PC software
· Free tracking generator, transmission response, VSWR measurement, signal power measurement, EMI pre-compliance test

Low-cost EMI Pre-compliance Solution
Extensive features and accessory support for EMI diagnostics and EMI pre-compliance testing, including：

· Test compensation Correction, frequency response compensation for probe, antenna, LISN, cable
· Support Limit line , Including EMI international standard limit template, or user-defined limit line
· Compliant CISPR 16 EMI filter and quasi-peak detector for quasi-peak measurement dwell time
· Support SRF5030T near-field probe set to find interference sources for radiation, cables, PCBs, etc.
· Provide SEM5040A artificial power network for single-phase device conducted disturbance voltage measurement
· EasySpectrum PC software, supports complete EMI pre-compliance test automation implementation process
· The PC software also supports the file configuration of the whole process, which is convenient for project management.

SWR and Transmission Response Measurement
The SSA3000X can be used as a network analyzer:

· With the tracking generator, the filter transmission response and the cable insertion can be measured
· With tracking source and external directional coupler (RB3X25), it can measure antenna and cable standing wave ratio VSWR, return loss

Abundant Power Measurement
With variety of wireless communication signal power measurement capabilities:

· CHP, Channel Power
· ACPR, Adjacent Channel Power Ratio
· OBW, Occupied Bandwidth
· T-Power, Time Domain Power
· TOI, Third-Order Intercept
· Spectrum Monitor
 

---

Product parameter

Frequency Range 9 kHz ~ 2.1 GHz, 9 kHz ~ 3.2 GHz	Resolution Bandwidth (RBW) 1 Hz~1 MHz，1-3-10 step
Phase Noise（typ.） < -98 dBc/Hz@ 1 GHz, 10 kHz offset	Display Average Noise Level (DANL) -161 dBm/Hz
Tracking Generator Standard	Amplitude Precision SSA3032X：<0.7 dB SSA3021X：< 0.7 dB
Standard Function Preamplifer	Optional Function Tracking Generator Kit Reflection Measurement Kit Advanced Measurement Kit EMI Pre-compliance Test Kit
Display 10.1 inch（1024x600）display

 

---

Models

Models	Frequency Range	Phase Noise（typ.）	Display Average Noise Level (DANL)	Resolution Bandwidth (RBW)	Tracking Generator
SSA3021X	9 kHz ~ 2.1 GHz	< -98 dBc/Hz@ 1 GHz, 10 kHz offset	-161 dBm/Hz	1 Hz~1 MHz，1-3-10 step	Standard
SSA3032X	9 kHz ~ 3.2 GHz	< -98 dBc/Hz@ 1 GHz, 10 kHz offset	-161 dBm/Hz	1 Hz~1 MHz，1-3-10 step	Standard