Siglent SVA1000X Series Spectrum & Vector Network Analyzer

Spectrum Analyzer Frequency Range
9 kHz ~ 7.5 GHz

Vector Network Analyzer Frequency Range
100 kHz~7.5 GHz

Resolution Bandwidth (RBW)
1 Hz ~ 3 MHz
 

---

Product Introduction
SIGLENT SVA1000X Spectrum and Vector Network Analyzers are powerful and flexible tools for RF signal and network analysis. With a frequency range to 7.5 GHz, the SVA1000X analyzer delivers reliable automatic measurements and multiple modes of operation: the base model is a spectrum analyzer and a vector network analyzer, and optional functions include a distance-to-fault locator, and a vector signal modulation analyzer.

Key Features

• Spectrum Analyzer Frequency Range from 9 kHz up to 7.5 GHz
• Vector Network Analyzer Frequency Range from 100 kHz up to 7.5 GHz
• Displayed Average Noise Level (Typ.)：< -165 dBm/Hz
• -99 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)<
• Tracking Generator Standard

 

---

Product advantage

5 Powerful Measurement Functions in 1 Affordable Instrument
Vector Network Analysis + EMI Pre-Compliance Test + Distance-to-Default and Antenna Measurement + Spectrum Analyzer + Modulation Analysis = SVA1000X
As a versatile analyzer for spectrum analysis and network analysis of Siglent Technology, SVA1000X employs advanced microwave technology and modern digital processing algorithms. It has multiple functions and excellent performance. With all the functions and performance of the SSA3000X spectrum analyzer series, also with the built-in 10 M-1.5 G directional coupler, it is a fully functional dual-port single-direction vector network analyzer. It is an ideal tool for education and RF engineers.

Vector Network Analysis
The frequency range is from a minimum of 10 MHz to a maximum of 1.5 GHz:

· Vector network analysis, support simultaneous measurement of amplitude and phase response, and vector S11 and S21 parameters;
· 40 dB in single port direction, transmission dynamic range over 70 dB, support for port expansion and configurable speed factor;
· Display reflection/transmission coefficient, return/insertion loss, phase, group delay, standing wave ratio, Smith chart, polar circle chart, etc.
· DTF cable and antenna measurement, cable and antenna parameter measurement and analysis based on network analysis time domain measurement, can accurately locate cable faults, impedance analysis and other functions;
· Support 3.5 G range N-type OSL mechanical calibration;

Low-cost EMI Pre-compliance Solution
Extensive features and accessory support for EMI diagnostics and EMI pre-compliance testing, including：

· Test compensation Correction, frequency response compensation for probe, antenna, LISN, cable
​· Support Limit line , Including EMI international standard limit template, or user-defined limit line
​· Compliant CISPR 16 EMI filter and quasi-peak detector for quasi-peak measurement dwell time
​· Support SRF5030T near-field probe set to find interference sources for radiation, cables, PCBs, etc.
​· Provide SEM5040A artificial power network for single-phase device conducted disturbance voltage measurement
​· EasySpectrum PC software, supports complete EMI pre-compliance test automation implementation process

Deep Analysis of Modulated Signals
Abundant demodulation analysis:

· Supports AM/FM analog modulation analysis and complex modulation analysis functions such as ASK/FSK/PSK/MSK/QAM
· EVM, amplitude and phase offset error, IQ offset error, gain imbalance and many other data analysis capabilities
· It has various analysis formats such as eye diagram, constellation diagram, phase diagram, time domain, frequency domain and error domain

Abundant Power Measurement
· CHP, Channel Power
· ACPR, Adjacent Channel Power Ratio
· OBW, Occupied Bandwidth
· T-Power, Time Domain Power
· CNR, Carrier Noise Ratio
· TOI, Third-Order Intercept
· Harmonic measurement
· Spectrum Monitor

Minimalist Design, Convenient and Easy to Use
Modern industrial design, simple display interface and operation mode
Multi-point capacitive touch screen , support mouse and keyboard
Support screen editing and protection
Advanced remote control: support remote network monitoring based on computer or monbile terminal equipment, FTP file operation
 

---

Product parameter

Frequency Range 9 kHz ~ 1.5 GHz, 9 kHz~3.2 GHz, 9 kHz - 7.5 GHz	Max Analysis Bandwidth -
Phase Noise（typ.） <-98 dBc/Hz, <-99 dBc/Hz	Display Average Noise Level (DANL) -156 dBm/Hz, -161 dBm/Hz, -165 dBm/Hz
Vector Network Analysis Range 100 kHz ~ 1.5 GHz, 100 kHz ~ 3.2 GHz, 100 kHz ~ 7.5 GHz	Resolution Bandwidth (RBW) 1 Hz ~ 1 MHz, 1-3-10 step, 1 Hz to 3 MHz, in 1-3-10 step
Tracking Generator Standard	Third-order SVA1015X：+8 dBm SVA1032X：+10 dBm SVA1075X：+14 dBm
Amplitude Precision SVA1015X：<1.2 dB SVA1032X：<0.7 dB SVA1075X：<0.7 dB	Touch Screen Multi Touch, Mouse and Keyboard supported
Calibration kits Optional	Cable fault location Optional
Advanced Measurement Kit(Opt.) CHP, ACPR, OBW, CNR, Harmonic, TOI, Monitor	EMI Pre-compliance Test Kit(Opt.) EMI Filter and Quasi-Peak Detector, Easy Spectrum software
Modulation Types(Opt.) ASK，FSK，AM，FM，QAM，PSK，MSK	Communication Interface USB Device，USB Host（USB-GPIB），LAN
Remote Control Capability SCPI / Labview / IVI based on USB-TMC / VXI-11 / Socket / Telnet	Remote Controller NI-MAX, Web Browser, Easy Spectrum software, File Explorer

 

---

Models

Models	Frequency Range	Max Analysis Bandwidth	Display Average Noise Level (DANL)	Vector Network Analysis Range	Resolution Bandwidth (RBW)	Tracking Generator
SVA1015X	9 kHz ~ 1.5 GHz	-	-156 dBm/Hz	100 kHz ~ 1.5 GHz	1 Hz ~ 1 MHz, 1-3-10 step	Standard
SVA1032X	9 kHz~3.2 GHz	-	-161 dBm/Hz	100 kHz ~ 3.2 GHz	1 Hz ~ 1 MHz, 1-3-10 step	Standard
SVA1075X	9 kHz - 7.5 GHz	-	-165 dBm/Hz	100 kHz ~ 7.5 GHz	1 Hz to 3 MHz, in 1-3-10 step	Standard