Details
Siglent SDS3000X HD Series Digital Storage Oscilloscope
Bandwidth
1 GHz
Real time sampling rate
4 GSa/s
Channels
4 + EXT
Product Introduction
DS3000X HD series oscilloscopes are one of the classic products of Siglent. The bandwidth ranges from 1 GHz to 350 MHz, providing 4 channels plus expansion options. Its sampling rate is as high as 4 GSa/s and waveform capture rate is 890,000 wfm/s, which ensures the real-time and accuracy of signal capture. The high-resolution display in HD mode makes the waveform details clearer, which is suitable for the diversified needs of electronic R&D and education.
Key Features
Product advantage
12-bit ADC：waveform details are clearly visible
SDS3000X HD series oscilloscopes are equipped with 12-bit high-resolution ADC, with quantization level up to 4096, and the resolution can be increased to 16-bit in high-resolution mode (ERES), which together with the vertical and horizontal zoom functions, helps users observe the details of waveforms in a more complete and clearer way.
ENOB - Effective Number of ADC Bits
When a high-speed ADC performs data acquisition, the signal-to-noise-to-distortion ratio of the actual ADC falls short of the desired performance that its nominal number of bits should achieve due to noise and distortion. Since the ADC is only a part of the oscilloscope system and cannot be used independently, the ENOB indicator of the whole oscilloscope system will be more meaningful.
SDS3000X HD is up to 8.2 to 8.5-bit, with less time error and frequency spuriousness, which can effectively ensure the accuracy of measurement.
Multiple trigger types
SDS3000X HD series oscilloscopes provide a variety of trigger types, including edge, interval, video, serial bus, area triggering, etc. Among them, area triggering is different from traditional triggering, which can be applied to episodic signals whose parameter characteristics are not yet clear, and the signal capture can be completed by creating and defining an area using only the mouse or touch.
Bus trigger supports I2C, SPI, CAN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and other buses, providing test solutions for embedded, automotive, computer and other serial buses.
Power analysis：quickly get power parameters
SDS3000X HD can be equipped with optional power supply analysis function, together with Siglent’s voltage probes (e.g., DPB5000 series) and current probes (e.g., CP6000 series), it can quickly and accurately analyze 12 parameters of power supply such as power quality, current harmonics, inrush current, transient response, etc.
For example, to improve the efficiency of the power supply by minimizing switching loss, to evaluate the working stability of the device by counting the probability that the power device transients exceed the safe working zone under all working conditions.
50MHz waveform generator
SDS3000X HD can be directly connected to the waveform generator SAG1021I via the USB interface. With a sampling rate of 125MSa/s and 14-bit resolution, the SAG1021I provides predefined waveform outputs of up to 50MHz, including sine, square, triangle, pulse, noise, DC, and 45 built-in arbitrary waveforms.
Users can also edit arbitrary waveforms through the EasyWave host computer software. The plug-and-play nature of the SAG1021I allows users to quickly and easily set up tests for a wide range of scientific experiments and industrial control applications.
Product parameter
Models
Bandwidth
1 GHz
Real time sampling rate
4 GSa/s
Channels
4 + EXT
Product Introduction
DS3000X HD series oscilloscopes are one of the classic products of Siglent. The bandwidth ranges from 1 GHz to 350 MHz, providing 4 channels plus expansion options. Its sampling rate is as high as 4 GSa/s and waveform capture rate is 890,000 wfm/s, which ensures the real-time and accuracy of signal capture. The high-resolution display in HD mode makes the waveform details clearer, which is suitable for the diversified needs of electronic R&D and education.
Key Features
- Bandwidth：1 GHz、500 MHz、350 MHz
- Memory depth： Up to 400 Mpts/ch
- ADC：12-bit
- Real time sampling rate： Up to 4 GSa/s
- Waveform Capture rate：Up to 890,000 wfm/s
- Low background noise: 125 μVrms @ 1 GHz bandwidth
Product advantage
12-bit ADC：waveform details are clearly visible
SDS3000X HD series oscilloscopes are equipped with 12-bit high-resolution ADC, with quantization level up to 4096, and the resolution can be increased to 16-bit in high-resolution mode (ERES), which together with the vertical and horizontal zoom functions, helps users observe the details of waveforms in a more complete and clearer way.
ENOB - Effective Number of ADC Bits
When a high-speed ADC performs data acquisition, the signal-to-noise-to-distortion ratio of the actual ADC falls short of the desired performance that its nominal number of bits should achieve due to noise and distortion. Since the ADC is only a part of the oscilloscope system and cannot be used independently, the ENOB indicator of the whole oscilloscope system will be more meaningful.
SDS3000X HD is up to 8.2 to 8.5-bit, with less time error and frequency spuriousness, which can effectively ensure the accuracy of measurement.
Multiple trigger types
SDS3000X HD series oscilloscopes provide a variety of trigger types, including edge, interval, video, serial bus, area triggering, etc. Among them, area triggering is different from traditional triggering, which can be applied to episodic signals whose parameter characteristics are not yet clear, and the signal capture can be completed by creating and defining an area using only the mouse or touch.
Bus trigger supports I2C, SPI, CAN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and other buses, providing test solutions for embedded, automotive, computer and other serial buses.
Power analysis：quickly get power parameters
SDS3000X HD can be equipped with optional power supply analysis function, together with Siglent’s voltage probes (e.g., DPB5000 series) and current probes (e.g., CP6000 series), it can quickly and accurately analyze 12 parameters of power supply such as power quality, current harmonics, inrush current, transient response, etc.
For example, to improve the efficiency of the power supply by minimizing switching loss, to evaluate the working stability of the device by counting the probability that the power device transients exceed the safe working zone under all working conditions.
50MHz waveform generator
SDS3000X HD can be directly connected to the waveform generator SAG1021I via the USB interface. With a sampling rate of 125MSa/s and 14-bit resolution, the SAG1021I provides predefined waveform outputs of up to 50MHz, including sine, square, triangle, pulse, noise, DC, and 45 built-in arbitrary waveforms.
Users can also edit arbitrary waveforms through the EasyWave host computer software. The plug-and-play nature of the SAG1021I allows users to quickly and easily set up tests for a wide range of scientific experiments and industrial control applications.
Product parameter
| Bandwidth 350 MHz, 500 MHz, 1 GHz |
Channels 4 + EXT |
| Sampling Rate 4 GSa/s |
Vertical Resolution 12-bit |
| Memory Depth 400 Mpts/ch |
Capture Rate 890,000 wfm/s |
| Screen Size 10.1-inch capacitive touch screen with resolution of 1024*600 |
I/O USB 3.0 Host x2, USB 2.0 Host x1, USB 3.0 Device, 10M/100M/1000M LAN, External trigger, Auxiliary output(TRIG OUT, PASS/FAIL) |
| Measurement 50+ parameters, statistics, histogram, trend, and track supported |
Digital channel 16 digital channels. Purchase 16-channel logic analyzer probe SPL2016, which can realize 16-channel digital channel acquisition function. |
| Trigger type Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Setup/hold, Delay, Serial |
Math 4 traces 2 Mpts FFT, Filter, +, -, x, ÷, ∫dt, d/dt, √, Identity, Negation, Absolute, Sign, ex, 10x, ln, lg, Interpolation, MaxHold, MinHold, ERES, Average. Supports formula editor |
| Serial trigger and decode Standard: I2C, SPI, UART, CAN, LIN Optional: CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only), ARINC429 |
Data analysis Search, Navigate, History, Mask Test, Digital Voltmeter, Counter, Waveform Histogram, Bode plot, and Power Analysis |
| Waveform generator The maximum output frequency is 50 MHz. You need to purchase an external signal source (SAG1021I) for use. |
Probe (Standard) 500 MHz, 1 probe supplied for each channel |
Models
| Models | Bandwidth | Channels | Vertical Resolution | Sampling Rate | Memory Depth | Capture Rate |
|---|---|---|---|---|---|---|
| SDS3104X HD | 1 GHz | 4 + EXT | 12-bit | 4 GSa/s | 400 Mpts/ch | 890,000 wfm/s |
| SDS3054X HD | 500 MHz | 4 + EXT | 12-bit | 4 GSa/s | 400 Mpts/ch | 890,000 wfm/s |
| SDS3034X HD | 350 MHz | 4 + EXT | 12-bit | 4 GSa/s | 400 Mpts/ch | 890,000 wfm/s |
View more about Siglent SDS3000X HD Series Digital Storage Oscilloscope on main site