Details
Siglent SDS800X HD Series Digital Storage Oscilloscope
Bandwidth
70-200 MHz
Real time sampling rate
2 GSa/s
Channels
2/4
Product Introduction
SDS800X HD series oscilloscopes are oriented to high-performance testing applications, providing a bandwidth range from 70 MHz to 200 MHz, and are suitable for testing and debugging of various precision electronic devices. This series also supports 2-4 analog channels, and can be optionally expanded to meet diverse test requirements. Its sampling rate is as high as 2 GSa/s and waveform capture rate is 500,000 wfm/s, which ensures fast capture of transient signals. The vertical resolution of 12-bit, combined with the storage depth of 100 Mpts, brings clear and detailed waveform data to users, and is an effective assistant for engineers to design circuits and troubleshoot.
Key Features
Product advantage
12-bit High Resolution
High-resolution oscilloscopes have excellent signal detection and display capabilities, which help analyze the details and characteristics of signals, and provide a great advantage in applications such as high-precision power supply testing, power supply ripple measurement, equipment performance optimization, and engine control unit testing.
Long Memory Depth
With a maximum memory depth of up to 100 Mpts, SDS800X HD is suitable for observing and analyzing long-duration signals, low-frequency signals, and transient phenomena. With a large memory depth, the oscilloscope is able to process more data, and the accuracy and stability of the calculation results are also higher.
Efficient Power Analysis
Power analysis with Siglent’s voltage probe (DPB5000 series) and current probe (CP6000 series) can quickly and accurately analyze 12 parameters such as power quality, current harmonics, inrush current, transient response, etc., which helps engineers eliminate cumbersome manual configurations and complex formulae calculations. It is extremely suitable for observing abnormal harmonics, analyzing harmonics, evaluating equipment stability, judging electromagnetic interference and other tests.
Excellent Loop Response Testing
SDS800X HD comes standard with Bode plot, and with Siglent’s Isolated Signal Generator option (SAG1021I) or Siglent’s Arbitrary Waveform Generator, it can perform loop response testing, provide the frequency response curve of the DUT, and easily obtain the gain and phase values at each frequency point. Meanwhile, with the help of data list, cursor measurement, and automatic measurement functions, you can analyze the Bode Plot curve in detail, judge the system stability and so on.
Multiple Triggering and Decoding
SDS800X HD has a variety of triggering types, including edge, slope, delay, set/hold, and a variety of bus triggers (serial triggers). It supports triggering and decoding of I2C, SPI, UART protocols in the embedded industry and CAN, LIN protocols in the automotive industry, and can accurately capture and intuitively display the protocol information of the bus in a table or in other ways, so that it can be stably tested.
Powerful Math Functions
Built-in FFT function, the maximum number of operation points is 2Mpts, 4 independent Math waveforms, and supports user-defined operation expressions. With superior spectral resolution, it can more accurately analyze the frequency components and energy distribution of signals, easily transforming into a spectrum analyzer. FFT supports a variety of window functions, ordinary, average, maximum value hold mode, support for peak detection, automatic detection of stray frequencies and marking the formation of a list of displays.
16-channel digital logic signal analysis
SDS800X HD can be used with Siglent’s 16-channel logic analyzer probe option (SLA1016) to add 16 digital channels to the instrument without affecting other test functions, realizing mixed-signal acquisition and analysis, and quickly solving analog-digital mixed-signal design and analysis problems.
Product parameter
Models
Configure your instrument
Standard Accessories
Probe (Standard)
Other
Optional Accessories
Probe
Other
Options
Analysis Options
Bandwidth
70-200 MHz
Real time sampling rate
2 GSa/s
Channels
2/4
Product Introduction
SDS800X HD series oscilloscopes are oriented to high-performance testing applications, providing a bandwidth range from 70 MHz to 200 MHz, and are suitable for testing and debugging of various precision electronic devices. This series also supports 2-4 analog channels, and can be optionally expanded to meet diverse test requirements. Its sampling rate is as high as 2 GSa/s and waveform capture rate is 500,000 wfm/s, which ensures fast capture of transient signals. The vertical resolution of 12-bit, combined with the storage depth of 100 Mpts, brings clear and detailed waveform data to users, and is an effective assistant for engineers to design circuits and troubleshoot.
Key Features
- ADC：12-bit
- Bandwidth：70/100/200 MHz
- Memory depth：50/100 Mpts
- Real time sampling rate：2 GSa/s
- Capture rate：500,000 wfm/s（Sequence Mode）
- 7 TFT-LCD with capacitive touch screen
Product advantage
12-bit High Resolution
High-resolution oscilloscopes have excellent signal detection and display capabilities, which help analyze the details and characteristics of signals, and provide a great advantage in applications such as high-precision power supply testing, power supply ripple measurement, equipment performance optimization, and engine control unit testing.
Long Memory Depth
With a maximum memory depth of up to 100 Mpts, SDS800X HD is suitable for observing and analyzing long-duration signals, low-frequency signals, and transient phenomena. With a large memory depth, the oscilloscope is able to process more data, and the accuracy and stability of the calculation results are also higher.
Efficient Power Analysis
Power analysis with Siglent’s voltage probe (DPB5000 series) and current probe (CP6000 series) can quickly and accurately analyze 12 parameters such as power quality, current harmonics, inrush current, transient response, etc., which helps engineers eliminate cumbersome manual configurations and complex formulae calculations. It is extremely suitable for observing abnormal harmonics, analyzing harmonics, evaluating equipment stability, judging electromagnetic interference and other tests.
Excellent Loop Response Testing
SDS800X HD comes standard with Bode plot, and with Siglent’s Isolated Signal Generator option (SAG1021I) or Siglent’s Arbitrary Waveform Generator, it can perform loop response testing, provide the frequency response curve of the DUT, and easily obtain the gain and phase values at each frequency point. Meanwhile, with the help of data list, cursor measurement, and automatic measurement functions, you can analyze the Bode Plot curve in detail, judge the system stability and so on.
Multiple Triggering and Decoding
SDS800X HD has a variety of triggering types, including edge, slope, delay, set/hold, and a variety of bus triggers (serial triggers). It supports triggering and decoding of I2C, SPI, UART protocols in the embedded industry and CAN, LIN protocols in the automotive industry, and can accurately capture and intuitively display the protocol information of the bus in a table or in other ways, so that it can be stably tested.
Powerful Math Functions
Built-in FFT function, the maximum number of operation points is 2Mpts, 4 independent Math waveforms, and supports user-defined operation expressions. With superior spectral resolution, it can more accurately analyze the frequency components and energy distribution of signals, easily transforming into a spectrum analyzer. FFT supports a variety of window functions, ordinary, average, maximum value hold mode, support for peak detection, automatic detection of stray frequencies and marking the formation of a list of displays.
16-channel digital logic signal analysis
SDS800X HD can be used with Siglent’s 16-channel logic analyzer probe option (SLA1016) to add 16 digital channels to the instrument without affecting other test functions, realizing mixed-signal acquisition and analysis, and quickly solving analog-digital mixed-signal design and analysis problems.
Product parameter
| Bandwidth 70 MHz, 100 MHz, 200 MHz |
Channels 2, 4 |
| Sampling Rate 2 GSa/s |
Vertical Resolution 12-bit |
| Memory Depth 100 Mpts, 50 Mpts |
Screen Size 7-inch capacitive touch screen with resolution of 1024*600 |
| Capture Rate 500,000 wfm/s |
Serial trigger and decode (Standard I2C、SPI、UART、CAN、LIN |
| Trigger type Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Delay, Setup/Hold time, Serial |
Digital channel 16 digital channels. The acquisition function of 16 digital channels can be realized by purchasing 16-channel logic analyzer probe SLA1016. |
| Math 4 traces 2 Mpts FFT, Filter, +, -, x, ÷, ∫dt, d/dt, √, Identity, Negation, Absolute, Sign, ex, 10x, ln, lg, Interpolation, MaxHold, MinHold, ERES, Average. Supports formula editor |
Data analysis Search, Navigate, History, Mask Test, Counter, Bode plot, and Power Analysis |
| I/O USB 2.0 Host x2, USB 2.0 Device, 10 M / 100 M LAN, Auxiliary output (TRIG OUT, PASS/FAIL), SBUS (Siglent MSO) |
Waveform generator The maximum output frequency is 25 MHz. You need to purchase an external signal source (SAG1021I) for use. |
Models
| Models | Bandwidth | Channels | Vertical Resolution | Sampling Rate | Memory Depth | Capture Rate |
|---|---|---|---|---|---|---|
| SDS824X HD | 200 MHz | 4 | 12-bit | 2 GSa/s | 100 Mpts | 500,000 wfm/s |
| SDS822X HD | 200 MHz | 2 | 12-bit | 2 GSa/s | 100 Mpts | 500,000 wfm/s |
| SDS814X HD | 100 MHz | 4 | 12-bit | 2 GSa/s | 50 Mpts | 500,000 wfm/s |
| SDS812X HD | 100 MHz | 2 | 12-bit | 2 GSa/s | 50 Mpts | 500,000 wfm/s |
| SDS804X HD | 70 MHz | 4 | 12-bit | 2 GSa/s | 50 Mpts | 500,000 wfm/s |
| SDS802X HD | 70 MHz | 2 | 12-bit | 2 GSa/s | 50 Mpts | 500,000 wfm/s |
Configure your instrument
Standard Accessories
Probe (Standard)
| Product | Description |
| PP215 | Passive probe, 200 MHz bandwidth, 1X/10X attenuation ratio and input impedance of 13pF || 1MΩ/10MΩ. |
| PP510 | Passive probe, 100 MHz bandwidth, 1X/10X attenuation ratio, and input impedance of 13pf ||| 1mω/10mω. |
| PB470 | Passive probe, 70 MHz bandwidth, 1X/10X attenuation ratio and input impedance of 13pF || 1MΩ/10MΩ. |
Other
| Product | Description |
| Power cord | The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately. |
| USB Cable | USB-A to USB-B. Used to connect instrument to PC for communication. |
| SDS800X HD Quick Start |
Optional Accessories
Probe
| Product | Description |
| CPL5100 | Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter. |
| DPB1300 | High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface. |
| DPB4080 | High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface. |
| DPB5150 | High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface. |
| DPB5150A | High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface. |
| DPB5700 | High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. |
| DPB5700A | High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. |
| HPB4010 | High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ. |
| CP4020 | Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. |
| CP4050 | Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply. |
| CP4070 | Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. |
| CP4070A | Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply. |
| CP6030 | Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. |
| CP6030A | Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. |
| CP6150 | Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter. |
| CP6500 | Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter. |
| Product | Description |
| USB arbitrary waveform generator SAG1021I (isolated) | USB arbitrary waveform generator module (isolated) integrates sine wave, square wave, triangular wave, pulse wave, noise, DC and 45 kinds of built-in arbitrary waves. Users can also edit arbitrary waveforms through EasyWave PC software. |
| STB-3 Demo board | Signals include various sine and square waves, AM, burst, and common serial bus signals. |
| DF2001A | The phase calibration board, used in conjunction with power analysis software, is used to calibrate the phase difference generated by the voltage and current probes during transmission. |
| Portable soft bag BAG-S1 | suitable for SDS2000X-E, SDS1000X/X+, SDS1000X-E/X-C, SDS1000A/E+/F+/CNL+/DL+series |
| SLA1016 | 16-channel logic probe (hardware), sampling rate and storage depth are jointly determined by oscilloscope and probe, which is suitable for SIGLENT technology SDS1000X HD, SDS800X HD and SDS1000X-E (4CH) models. |
Options
Analysis Options
| Product | Description |
| SDS800XHD-PA | Power Analysis Option (Software) |
View more about Siglent SDS800X HD Series Digital Storage Oscilloscope on main site