Details
Siglent SDS5000X Series Super Phosphor Oscilloscope
Bandwidth
1 GHz
Real time sampling rate
5 GSa/s
Channels
2/4 + EXT
Product Introduction
SIGLENT SDS5000X series digital oscilloscopes are designed for high-performance testing needs. The series offers an analog bandwidth of 350 MHz to 1 GHz, a sampling rate of up to 5 GSa/s, and a memory depth of 250 Mpts to ensure the capture of fine signal details. Supporting a wide range of advanced features such as baud graphs, power analysis software and multiple serial protocol triggering and decoding, they are ideal for engineers and researchers.
Key Features
Product advantage
Multi-touch, remote control
SDS5000X is equipped with a 10.1-inch touch screen, you can quickly adjust the waveform position, set the area trigger, parameter selection and setup. SDS5000X supports up to dozens of parameter measurements, and if you use the traditional knob to select, it will undoubtedly consume a lot of time, the touch screen selection, saving time and effort. In addition, SDS5000X also supports external mouse and keyboard.
Web remote control (Webserver) allows remote control of the oscilloscope without the need to install large-capacity drivers, and through the rear VGA interface, measurement results can be demonstrated. Meanwhile, SDS5000X is also equipped with free upper computer software, which supports SCPI programming commands.
Rich trigger types
The SDS5000X supports up to 11 intelligent trigger types to quickly trigger signals with different characteristics. For example, using Runt (under-amplitude triggering), you can quickly trigger at a set amplitude value.
For special signals that may require close to 20 setup steps with conventional trigger types, the SDS5000X adds area triggering to all trigger types. Complex signals can be triggered in “” one step “” by simply drawing the trigger zone box.
Trigger sources supported by the SDS5000X include 4 analog channels, 16 digital channels, EXT,EXT/5, AC Line.
Triggering and decoding of serial protocols covering various industries
The SDS5000X offers a wide range of serial protocol triggering and decoding across multiple industries.
Powerful Measurement Functions
The SDS5000X currently supports more than 55 parameter measurements. The advanced measurement function can measure 12 parameters at the same time and display the trend of parameter values in the form of a trend graph. The statistics function can be opened to display the current value of the parameter, average value, minimum value, maximum value, standard deviation and the number of statistics. And the distribution of parameter values can be displayed in the form of histogram, for example, when measuring clock jitter, you can visualize the distribution of jitter.
If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.
The source options for measurement include analog and digital channels as well as signals after Zoom, MATH waveforms, and Ref waveforms.
All-in-one oscilloscope
The SDS5000X combines a variety of functions in one unit, greatly saving space and providing more value to the user.
16-channel Logic Analyzer
25 MHz Isolated Signal Source Module, which can be used with the baud plot function for power loop response testing
Template Testing
Digital Multimeter
Baud Plot Function
Power Supply Analysis Software
Counter
Frequency Counter
Product parameter
Models
Configure your instrument
Standard Accessories
Probe (Standard)
Other
Optional Accessories
Probe
Other
Options
Trigger/decode Options
Bandwidth/Channel Upgrade Options
Bandwidth
1 GHz
Real time sampling rate
5 GSa/s
Channels
2/4 + EXT
Product Introduction
SIGLENT SDS5000X series digital oscilloscopes are designed for high-performance testing needs. The series offers an analog bandwidth of 350 MHz to 1 GHz, a sampling rate of up to 5 GSa/s, and a memory depth of 250 Mpts to ensure the capture of fine signal details. Supporting a wide range of advanced features such as baud graphs, power analysis software and multiple serial protocol triggering and decoding, they are ideal for engineers and researchers.
Key Features
- Bandwidth：350 MHz, 500 MHz, 1 GHz
- Real-time sampling rate：5 GSa/s
- Memory depth：250 Mpts
- Waveform capture rate：500,000 wfm/s (Sequence mode)
- Mixed Signal Measurement (MSO)
Product advantage
Multi-touch, remote control
SDS5000X is equipped with a 10.1-inch touch screen, you can quickly adjust the waveform position, set the area trigger, parameter selection and setup. SDS5000X supports up to dozens of parameter measurements, and if you use the traditional knob to select, it will undoubtedly consume a lot of time, the touch screen selection, saving time and effort. In addition, SDS5000X also supports external mouse and keyboard.
Web remote control (Webserver) allows remote control of the oscilloscope without the need to install large-capacity drivers, and through the rear VGA interface, measurement results can be demonstrated. Meanwhile, SDS5000X is also equipped with free upper computer software, which supports SCPI programming commands.
Rich trigger types
The SDS5000X supports up to 11 intelligent trigger types to quickly trigger signals with different characteristics. For example, using Runt (under-amplitude triggering), you can quickly trigger at a set amplitude value.
For special signals that may require close to 20 setup steps with conventional trigger types, the SDS5000X adds area triggering to all trigger types. Complex signals can be triggered in “” one step “” by simply drawing the trigger zone box.
Trigger sources supported by the SDS5000X include 4 analog channels, 16 digital channels, EXT,EXT/5, AC Line.
Triggering and decoding of serial protocols covering various industries
The SDS5000X offers a wide range of serial protocol triggering and decoding across multiple industries.
| I2C, SPI | Embedded serial protocol triggering and decoding |
| UART | PC Serial Protocol Trigger and Decode |
| CAN, CAN FD, LIN, FlexRay | Automotive serial protocol triggering and decoding |
| I2S | Audio serial protocol triggering and decoding |
| MIL-STD 1553B | Flight System Serial Protocol Triggering and Decoding |
Powerful Measurement Functions
The SDS5000X currently supports more than 55 parameter measurements. The advanced measurement function can measure 12 parameters at the same time and display the trend of parameter values in the form of a trend graph. The statistics function can be opened to display the current value of the parameter, average value, minimum value, maximum value, standard deviation and the number of statistics. And the distribution of parameter values can be displayed in the form of histogram, for example, when measuring clock jitter, you can visualize the distribution of jitter.
If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.
The source options for measurement include analog and digital channels as well as signals after Zoom, MATH waveforms, and Ref waveforms.
All-in-one oscilloscope
The SDS5000X combines a variety of functions in one unit, greatly saving space and providing more value to the user.
16-channel Logic Analyzer
25 MHz Isolated Signal Source Module, which can be used with the baud plot function for power loop response testing
Template Testing
Digital Multimeter
Baud Plot Function
Power Supply Analysis Software
Counter
Frequency Counter
Product parameter
| Bandwidth 350 MHz, 500 MHz, 1 GHz |
Channels 2+EXT, 4+EXT |
| Sampling Rate 5 GSa/s |
Vertical Resolution 8-bit |
| Memory Depth 250 Mpts/ch |
Screen Size 10.1-inch capacitive touch screen with resolution of 1024*600 |
| Capture Rate 500,000 wfm/s |
I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA |
| Trigger type Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualifed, Zone |
Serial triggering and decoding (standard) I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B |
| Serial trigger and decode Standard: I2C, SPI, UART, CAN, LIN Optional: CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only), ARINC429 (decode only) |
Digital channel 16 digital channels. Purchase 16-channel logic analyzer probe SPL2016, which can realize 16-channel digital channel acquisition function. |
| Waveform generator The maximum output frequency is 25 MHz. You need to purchase an external signal source (SAG1021I) for use. |
Probe (standard) SP3050A, 500 MHz, 1 probe supplied for each channel |
Models
| Models | Bandwidth | Channels | Vertical Resolution | Sampling Rate | Memory Depth | Capture Rate |
|---|---|---|---|---|---|---|
| SDS5104X | 1 GHz | 4+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
| SDS5102X | 1 GHz | 2+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
| SDS5054X | 500 MHz | 4+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
| SDS5052X | 500 MHz | 2+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
| SDS5034X | 350 MHz | 4+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
| SDS5032X | 350 MHz | 2+EXT | 8-bit | 5 GSa/s | 250 Mpts/ch | 500,000 wfm/s |
Configure your instrument
Standard Accessories
Probe (Standard)
| Product | Description |
| SP3050A | Passive probe, 500 MHz bandwidth, 10X attenuation ratio, input impedance of 11pF || 10MΩ, with automatic identification function. |
| Product | Description |
| USB Cable | USB-A to USB-B. Used to connect instrument to PC for communication. |
| Power cord | The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately. |
| SDS5000X Quick guide | SDS5000X Quick use guide for series oscilloscopes. |
Probe
| Product | Description |
| SPL2016 | 16-channel logic probe (hardware), sampling rate and storage depth are determined by oscilloscope, which is suitable for SIGLENT technology SDS7000A, SDS6000A, SDS6000L, SDS5000X HD, SDS5000X, SDS3000X HD, SDS2000X HD and SDS2000X Plus models. |
| SAP1000 | Active single-ended probe, 1 GHz bandwidth, 10X attenuation ratio, input impedance of 1.2pF || 1MΩ, offset range of ±12V, SAPBus interface. |
| SAP2500 | Active single-ended probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, input impedance of 1.1pF || 1MΩ, offset range of ±12V, SAPBus interface. |
| HPB4010 | High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ. |
| DPB1300 | High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface. |
| DPB4080 | High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface. |
| DPB5150 | High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface. |
| DPB5150A | High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface. |
| DPB5700 | High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. |
| DPB5700A | High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. |
| SAP2500D | Active differential probe, bandwidth of 2.5 GHz, attenuation ratio of 10X, differential input impedance of 1pF || 200kΩ, offset range of 8V, SAPBus interface. |
| TPA10 | The active probe interface of SIGLENT oscilloscope SAPBus with TPA10 probe adapter can be used to adapt the active probe of Tektek TekProbe interface level II interface, which can supply power and DC bias for the probe without external power supply or other circuits. |
| SAP4000P | Power rail probe, DC-4 GHz bandwidth, 1.1X attenuation ratio, input dynamic range ±600mV, offset range ±24V, SAPBus interface. |
| CP4020 | Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. |
| CP4050 | Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply. |
| CP4070 | Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. |
| CP4070A | Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply. |
| CP6030 | Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. |
| CP6030A | Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. |
| CP6150 | Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter. |
| CP6500 | Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter. |
| SCP5030 | Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, SAPBus interface. |
| SCP5030A | Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, SAPBus interface. |
| SCP5150 | Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter. |
| SCP5500 | Current probe, DC-2 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, SAPBus interface. |
| CPL5100 | Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter. |
| Product | Description |
| USB arbitrary waveform generator SAG1021I (isolated) | USB arbitrary waveform generator module (isolated) integrates sine wave, square wave, triangular wave, pulse wave, noise, DC and 45 kinds of built-in arbitrary waves. Users can also edit arbitrary waveforms through EasyWave PC software. |
| STB-3 Demo board | Signals include various sine and square waves, AM, burst, and common serial bus signals. |
| Portable soft BAG-S2 | Portable soft BAG-S2，suitable forSSA3000X Plus， SSA3000X， SVA1000X，SDS5000X，SDS3000X HD，SDS2000X Plus series |
| DF2001A | The phase calibration board, used in conjunction with power analysis software, is used to calibrate the phase difference generated by the voltage and current probes during transmission. |
| SDS5000X-RMK | Rack mount kit for SDS5000X Digital Oscilloscopes. |
Options
Trigger/decode Options
| Product | Description |
| SDS-5000X-1553B | MIL-STD-1553B Trigger/decode option |
| SDS-5000X-CANFD | CAN FD Trigger/decode option |
| SDS-5000X-FlexRay | FlexRayTrigger/decode option |
| SDS-5000X-I2S | IIS Trigger/decode option |
| SDS-5000X-SENT | SENT Protocol Trigger and Decoding Kit (Software) |
| SDS-5000X-Manch | Manchester protocol decoding (software) |
| SDS-5000X-ARINC | ARINC429 trigger & decode |
| Product | Description |
| SDS-5000X-4BW05 | The bandwidth of 4-channel model is upgraded from 350 MHz to 500 MHz (note: 350 MHz model cannot be upgraded to 1 GHz model). |
| SDS-5000X-4BW10 | The 4-channel model was upgraded from 500 MHz to 1 GHz. |
View more about Siglent SDS5000X Series Super Phosphor Oscilloscope on main site