Siglent SDS1000X-E Series Super Phosphor Oscilloscope

Bandwidth
200 MHz

Real time sampling rate
1 GSa/s

Channels
2 + EXT/4
 

---

Product Introduction
SDS1000X-E series is a high-quality product launched by SIGLENT for economical market. It provides 70 MHz to 200 MHz bandwidth, 1 GSa/s sampling rate and rich trigger options to ensure the accuracy and reliability of test results. It is an ideal choice for beginners and users with limited budget.

Key Features

• 2 + EXT/4 channels，1 GSa/s Real time sampling rate
• Bandwidth：100 MHz、200 MHz
• 1 Mpts FFT
• True measurement and math can use all 14 Mpts of memory
• Free Serial bus triggering and decoding：IIC, SPI, UART, RS232, CAN, and LIN

 

---

Product advantage

Deep Memory Depth, High Capture Rate
Digital trigger system, high trigger sensitivity and low jitter
256-level Intensity Grading and Color Temperature Display
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the transients or low-probability events
Using max record length of up to 14 Mpts, users are able to oversample to capture for longer time periods at higher resolution

Revolution in Data Analysis Processing
True fast measurement and math to all of 14M sample points so that there is minimal distortion on analysis
With hardware co-processor, faster data operations
1 M point FFT operation
Support Zoom, Gating, Math measurement and statistics
Support 38 automatic measurement functions

Power Loop Response Analysis / Bode Plot (4-channel series only)
Stability is a very important indicator in power supply design. In general, stability measurement requires a special frequency response analyzer, but it is very expensive. Siglent offers an affordable solution: SDS1000X-E oscilloscope and signal source Power loop measurement with standard Free Bode Plot II software.
· higher measurement sensitivity and accuracy
· Variable excitation scan mode allowed for complex test scenarios of the power control loop test box
· User-friendly UI design
· List and cursor measurements, more intuitive

Standard Serial Decoding
Most oscilloscopes on the market do not offer serial decoding for free but SDS1000X-E does. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN.

The waveform and data can be displayed at the same time and the detailed decoding information is displayed in the form of a list, and the data can be stored and exported.

Powerful Debugging and Analysis Capabilities
Event search and navigation to quickly locate events of interest.
MSO logic analyzer integration, mixed signal analysis tool
The combination of history and sequence mode, quickly capture abnormal waveforms
Hardware-based Pass/Fail mode for long-term monitoring signals

Remote Control via Web Pages
With built-in Web Server, there is no need to install driver software and PC software. You can control the instrument, observe waveforms, obtain measurement results using the browser remotely. Especially when instruments used in high pressure, high temperature and other special environments. The SDS1000X-E supports both web and mobile web layouts, making it easier to control the instrument even on your phone.
 

---

Product parameter

Bandwidth 100 MHz, 200 MHz	Channels 2+EXT, 4
Sampling Rate 1 GSa/s	Vertical Resolution 8-bit
Memory Depth 14 Mpts	Screen Size 7-inch TFT-LCD display with resolution of 800 * 480
Capture Rate 400,000 wfm/s	Trigger type Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video
Waveform generator The maximum output frequency is 25 MHz. Only SDS1000X-E series 4-channel models are supported for use with external signal source (SAG1021I).	Serial trigger and decoder(Standard) IIC, SPI, UART/RS232, CAN, LIN
Digital channel 16 digital channels. Only the 4-channel model of SDS1000X-E series can be used with 16-channel logic analyzer probe SLA1016, which can realize 16-channel digital channel acquisition function.	Bode plot ( four channel series only) Minimum start frequency of 10 Hz, minimum scan bandwith of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points
I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus(Siglent MSO)	Probe (standard) SDS1104X-E: 4 pcs passive probe PP510; SDS1204X-E/SDS1202X-E：4/2 pcs passive probe PP215
Weight Four channel series: Without package 2.6 kg; With package 3.8 kg; Two channel series: Without package 2.5 kg; With package 3.5 kg

 

---

Models

Models	Bandwidth	Channels	Vertical Resolution	Sampling Rate	Memory Depth	Capture Rate
SDS1204X-E	200 MHz	4	8-bit	1 GSa/s	14 Mpts	400,000 wfm/s
SDS1202X-E	200 MHz	2+EXT	8-bit	1 GSa/s	14 Mpts	400,000 wfm/s
SDS1104X-E	100 MHz	4	8-bit	1 GSa/s	14 Mpts	400,000 wfm/s

 

---

Configure your instrument

Standard Accessories
Probe (Standard)

Product	Description
PP215	Passive probe, 200 MHz bandwidth, 1X/10X attenuation ratio and input impedance of 13pF || 1MΩ/10MΩ.
PP510	Passive probe, 100 MHz bandwidth, 1X/10X attenuation ratio, and input impedance of 13pf ||| 1mω/10mω.

Other

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
SDS1000X-E QuickStart	Quick use guide of SDS1000X-E series oscilloscopes.

Optional Accessories
Probe

Product	Description
HPB4010	High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ.
CP4020	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.
CP4050	Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply.
CP4070	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply.
CP4070A	Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply.
DPB4080	High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface.
DPB5150	High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface.
DPB5150A	High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface.
DPB5700	High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.
DPB5700A	High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface.

Other

Product	Description
USB arbitrary waveform generator SAG1021I (isolated)	USB arbitrary waveform generator module (isolated) integrates sine wave, square wave, triangular wave, pulse wave, noise, DC and 45 kinds of built-in arbitrary waves. Users can also edit arbitrary waveforms through EasyWave PC software.
STB-3 Demo board	Signals include various sine and square waves, AM, burst, and common serial bus signals.
SDS1X-E-RMK	SDS1X-E-RMK cabinet installation kit, suitable for SDS1000X-E and SDS2000X-E models.
Portable soft bag BAG-S1	suitable for SDS2000X-E, SDS1000X/X+, SDS1000X-E/X-C, SDS1000A/E+/F+/CNL+/DL+series
TL_WN725N	USB WIFI adapter (4-channel series support)
SLA1016	16-channel logic probe (hardware), sampling rate and storage depth are jointly determined by oscilloscope and probe, which is suitable for SIGLENT technology SDS1000X HD, SDS800X HD and SDS1000X-E (4CH) models.