Measurement Equipment Supplier Johor, Laser Marking System Malaysia, Power Quality Analyzer Supply ~ Marktest Technology Sdn Bhd

Siglent SHS1000X Series Handheld Digital Oscilloscope

Siglent SHS1000X Series Handheld Digital Oscilloscope

Category: Oscilloscopes

Specifications

Handheld Oscilloscope Siglent SHS1202X SHS1102X SHS1000X Series

Details

Siglent SHS1000X Series Handheld Digital Oscilloscope

Bandwidth
200 MHz

Real time sampling rate
1 GSa/s

Channels
2

Product Introduction
SHS1000X series is a high-performance hand-held oscillograph carefully built by SIGLENT, which provides wide-band selection from 100 MHz to 200 MHz to meet diversified measurement requirements. Its unique double isolated channel design ensures the safety and accuracy in the measurement process. With a real-time sampling rate of up to 1 GSa/s and a storage depth of 12 Mpts, it can capture the rapidly changing signal details. Combined with the built-in multimeter function and recorder, SHS1000X series has become a right-hand man for engineers to conduct on-site testing and analysis, helping to improve work efficiency and accuracy.

Key Features

Isolation voltage：CAT II 1000 Vrms, CAT III 600 Vrms,
Integrated oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
100 MHz or 200 MHz bandwidth models
Sample rate of 1 GSa/s (single-channel)/500 MSa/s (two-channels)
Record length up to 12 Mpts.
Hardware-based true RMS multimeter
IP51 dust/water resistance certified

Product advantage

Full Isolation
IEC61010-2-030 defines measurement categories that rate the ability of measuring instruments to withstand short-term transient overvoltages outside the operating voltage.
For SHS1000X series, the max voltage input to the analog scope inputs is CATIII 600 Vrms, CATII 1000 Vrms, and the max input for the multimeter is CATIII 600 Vrms, CATII 1000 Vrms.
SHS1000X series features full isolation between the two oscilloscope channels, one multimeter channel, power adapter and the USB host/device port. The full isolation makes it ideal for both laboratory and floating signal measurement because it reduces the risk of accidental short circuits.

Standard Serial trigger and decode
Standard Serial trigger and decode: IIC, SPI, UART, CAN, LIN, widely used in automotive and embedded industries. Because of its unique portable design and battery power supply, it can better meet the testing needs of the automotive and embedded industries that require on-site decoding.

Hardware-based true RMS multimeter
Integrated 6000 count (~ 3.5 digit) digital multimeter
Hardware-Based True RMS Measurement
Features up to 4-channel measurement value trend graphing that can store 3.5 M measurement points

Product parameter

Bandwidth
70 MHz, 100 MHz, 200 MHz

Channels
2

Sampling Rate
1 GSa/s

Vertical Resolution
8-bit

Memory Depth
12 Mpts

Capture Rate
400,000 wfm/s

Screen Size
5.6-inch TFT-LCD display with resolution of 640 * 480

Other Specification

Display	5.6-inch TFT-LCD (640x480)
Power Supply	Rechargeable 6900 mA high-capacity lithium battery
Dimension	276 mm * 168 mm * 68 mm
Accessories	Two Passive Probes,Multimeter pen,USB data cable,DC adapter,Power cord

Scope Specification

	SHS1072X	SHS1102X	SHS1202X
Bandwidth	70 MHz	100 MHz	200 MHz
Sample rate (Max.)	Two-channel share a single 1 GSa/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel is active, that channel has a sample rate of 1 GSa/s
Channels	2 analog oscilloscope channels, 1 multimeter channel
Memory depth (Max.)	6 Mpts/CH (dual-channel mode),12 Mpts/CH (single channel mode)
Waveform capture rate (Max.)	100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Trigger Type	Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Serial Trigger and decoder	IIC， SPI， UART， CAN， LIN
Data Logger(Recorder)	Sample Logger. The Max sample rate is 25 kSa/s, the Min sample rate is 1 Sa/s
Data Logger(Recorder)	Measurement Logger. The Max interval is 10 minutes, the Min interval is 0.1second. The Max items of logging is 4
I/O	USB Host， USB Device
Max input Voltage (Scope)	Between BNC Signal and Protecting Earth CAT III 600 Vrms，CAT II 1000 Vrms Between BNC GND and Protecting Earth CAT III 600 Vrms，CAT II 1000 Vrms Between BNC Signal and BNC GND CAT III 300 Vrms
Max input Voltage (Meter)	CAT III 600 Vrms， CAT II 1000 Vrms
Probe	PB925	PB925	PB925
Display	5.6-inch TFT-LCD (640x480)
Weight	Without package 1.75 kg. With package 3.5 kg

Multimeter Specification

Maximum Resolution	6000 Counts
DC Voltage	60 mV 600 mV-600 V 1000V	±1%±15 digit ±1%±5 digit ±1.5%±5digit
AC Voltage(45 Hz～400 Hz)	60 mV 600 mV-600 V 750V	±1%±15 digit ±1%±5 digit ±1.5%±5digit
DC Current	60 mA-600 mA 6 A-10 A	±4%±10digit ±5%±5 digit
AC Current(45 Hz～400 Hz)	60 mA-600 mA 6 A-10 A	±4%±10digit ±5%±5 digit
Capacitance	40 nF 400 nF-400 μF	±5%±50 digit ±5%±5 digit
Resistance	600 Ω-6 MΩ 60 MΩ	±1%±5 digit ±4%±5 digit
Continuity	Continuous beep when resistance < 50 Ω
Diode	0-2 V

Configure your instrument

Standard Accessories
Probe (Standard)

Product	Description
PB925	Passive probe, bandwidth of 250 MHz, attenuation ratio of 10X, input impedance of 16pF \|\| 10MΩ. Click to view the probe manual

Other

Product	Description
SHS1000 Quick guide	Quick guide for instrument standard
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
SHS1000X/SHS800X Portable soft bag	Portable bag, easy to take out.
Power adapter	The power adapter comes standard or can be purchased separately.
battery	The oscilloscope comes standard with a battery with a capacity of 69000 mAh.
SCD600MA Current measuring adapter
SCD10A current measuring adapter

Optional Accessories
Probe

Product	Description
HPB4010	High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF \|\| 100MΩ. Click to view the probe manual
DPB1300	High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF \|\| 10MΩ, BNC interface. Click to view the probe manual
DPB4080	High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF \|\| 54MΩ, BNC interface. Click to view the probe manual
DPB5150	High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF \|\| 10MΩ, BNC interface. Click to view the probe manual
DPB5150A	High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF \|\| 10MΩ, BNC interface. Click to view the probe manual
DPB5700	High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF \|\| 40MΩ, BNC interface. Click to view the probe manual.
DPB5700A	High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF \|\| 40MΩ, BNC interface. Click to view the probe manual
CP4020	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. Click to view the probe manual
CP4050	Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply. Click to view the probe manual
CP4070	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. Click to view the probe manual.
CP4070A	Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply. Click to view the probe manual
CP6030	Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. Click to view the probe manual.
CP6030A	Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. Click to view the probe manual.
CP6150	Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter. Click to view the probe manual.
CP6500	Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter. Click to view the probe manual.
CPL5100	Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter. Click to view the probe manual

Other

Product	Description
STB-3 Demo board	Signals include various sine and square waves, AM, burst, and common serial bus signals.

View more about Siglent SHS1000X Series Handheld Digital Oscilloscope on main site