Siglent SHS800X Series Handheld Digital Oscilloscope

Bandwidth
200 MHz

Real time sampling rate
1 GSa/s

Channels
2
 

---

Product Introduction

SHS800X series hand-held oscilloscope has won wide recognition in the market for its high cost performance and excellent performance. This series provides bandwidth selection from 100 MHz to 200 MHz, which is suitable for various application scenarios. Its dual-channel design combines the sampling rate of 1 GSa/s and the storage depth of 12 Mpts to ensure the integrity and accuracy of the signal.
In addition, SHS800X series also integrates eight common multimeter functions, such as voltage, current and resistance, which brings users a more convenient test experience. Long battery life and compact body design make it an ideal choice for engineers to carry around.

Key Features

• Integrated oscilloscope, serial trigger and decoder, spectrum analysis, data logger and multimeter functions into a convenient and portable design
• 100 MHz or 200 MHz bandwidth models
• Sampling rate of 1 GSa/s (single-channel)/500 MSa/s (two-channels)
• Record length up to 12 Mpts
• Waveform recording up to 22 hours
• IP51 dust/water resistance certified

 

---

Product advantage

Five-in-one handheld oscilloscope
SHS800X series hand-held oscillograph is a multifunctional oscilloscope which integrates the functions of oscilloscope, multimeter, recorder, spectrum analysis and protocol analysis, and is widely used in research and development, production, maintenance and other fields.
Oscilloscope：Using SIGLENT SPO digital fluorescence oscilloscope technology, the refresh rate reaches 400,000 frames per second, and the digital trigger technology makes the waveform display more stable. Five decoding functions widely used in embedded and automotive serial protocols are standard.
Multi-meter：The true RMS measurement based on hardware can not only measure various parameter values, but also draw the trend chart of the measured values of oscilloscope and multimeter.
Recorder：At the sampling rate of 25 kSa/s, the waveform can be recorded and played back for up to 22 hours.

Portable and Easy to Use
The front panel size smaller than A4 paper reduces the size of the instrument, the rear panel support frame supports vertical placement, and the side nylon handles are convenient for handheld operation. The included carrying case has ample room for the instrument, probes and other accessories. Perfect for field work and carrying on business trips.

Higher protection level, longer battery life
The rechargeable 6900 mA high-capacity lithium battery is UL certified and delivers up to 5.5 hours of work without a charge, greatly improving safety and battery life. The battery can be charged in the cabin or removed and charged with an external charger.

IP51 certified
The handheld oscilloscopes feature a sealed IP51 dust and drip-proof housing and has been tested to IEC60529 to guarantee the ruggedness that is needed to survive harsh environments. A rubberized surface with large keys also makes it easy to use in difficult environments.
 

---

Product parameter

Bandwidth 70 MHz, 100 MHz, 200 MHz	Channels 2
Sampling Rate 1 GSa/s	Vertical Resolution 8-bit
Memory Depth 12 Mpts	Capture Rate 400,000 wfm/s
Screen Size 5.6-inch TFT-LCD display with resolution of 640 * 480	Other Specifications Display 5.6-inch TFT-LCD (640x480) Power Supply Rechargeable 6900 mA high-capacity lithium battery Dimensions 276 mm * 168 mm * 68 mm Accessories Two Passive Probes,Multimeter pen,USB data cable,DC adapter,Power cord
Scope Specification   SHS807X SHS810X SHS820X   Bandwidth 70 MHz 100 MHz 200 MHz   Sample rate (Max.) Two-channel share a single 1 GSa/s ADC. When two channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel is active, that channel has a sample rate of 1 GSa/s   Channels 2 analog oscilloscope channels, 1 multimeter channel   Memory depth (Max.) 6 Mpts/CH (dual-channel mode),12 Mpts/CH (single channel mode)   Waveform capture rate (Max.) 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)   Trigger Type Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video   Serial Trigger and decoder IIC， SPI， UART， CAN， LIN   Data Logger(Recorder) Sample Logger. The Max sample rate is 25 kSa/s, the Min sample rate is 1 Sa/s   Measurement Logger. The Max interval is 10 minutes, the Min interval is 0.1second. The Max items of logging is 4   I/O USB Host， USB Device   Max input Voltage (Scope) CAT II 300 Vrms Between BNC Signal and Protecting Earth CAT II 30 Vrms Between BNC GND and Protecting Earth CAT II 300 Vrms Between BNC Signal and BNC GND   Max input Voltage (Meter) CATIII 300 Vrms， CATII 600 Vrms   Probe PP510 PP510 PP215   Display 5.6-inch TFT-LCD (640x480)   Weight Without package 1.75 kg. With package 3.5 kg	Multimeter Specification Maximum Resolution 6000 Counts DC Voltage 60 mV 600 mV-600 V 1000V ±1%±15 digit ±1%±5 digit ±1.5%±5digit AC Voltage(45 Hz～400 Hz) 60 mV 600 mV-600 V 750V ±1%±15 digit ±1%±5 digit ±1.5%±5digit DC Current 60 mA-600 mA 6 A-10 A ±4%±10digit ±5%±5 digit AC Current(45 Hz～400 Hz) 60 mA-600 mA 6 A-10 A ±4%±10digit ±5%±5 digit Capacitance 40 nF 400 nF-400 μF ±5%±50 digit ±5%±5 digit Resistance 600 Ω-6 MΩ 60 MΩ ±1%±5 digit ±4%±5 digit Continuity Continuous beep when resistance < 50 Ω Diode 0-2 V

 

---

Models

Models	Bandwidth	Channels	Vertical Resolution	Sampling Rate	Memory Depth	Capture Rate
SHS807X	70 MHz	2	8-bit	1 GSa/s	12 Mpts	400,000 wfm/s
SHS810X	100 MHz	2	8-bit	1 GSa/s	12 Mpts	400,000 wfm/s
SHS820X	200 MHz	2	8-bit	1 GSa/s	12 Mpts	400,000 wfm/s

 

---

Configure your instrument

Standard Accessories
Probe (Standard)

Product	Description
Passive probe PP510/215	PP510 100 MHz PP215 200 MHz Click to view the probe manual

Other

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
SHS1000X/SHS800X Portable soft bag	Portable bag, easy to take out.
battery	The oscilloscope comes standard with a battery with a capacity of 69000 mAh.
SCD600MA Current measuring adapter
SCD10A current measuring adapter

Optional Accessories
Probe

Product	Description
HPB4010	High voltage probe, DC-40 MHz bandwidth, 1000X attenuation ratio, input impedance 3pF || 100MΩ. Click to view the probe manual
DPB1300	High voltage differential probe, 50 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1300V, differential input impedance 2pF || 10MΩ, BNC interface. Click to view the probe manual
DPB4080	High voltage differential probe, 50 MHz bandwidth, 10X/100X attenuation ratio, maximum differential voltage 800 V, differential input impedance 1.2pF || 54MΩ, BNC interface. Click to view the probe manual
DPB5150	High voltage differential probe, bandwidth of 70 MHz, attenuation ratio of 50X/500X, maximum differential voltage of ±1500V, differential input impedance of 2pF || 10MΩ, BNC interface. Click to view the probe manual
DPB5150A	High voltage differential probe, 100 MHz bandwidth, 50X/500X attenuation ratio, maximum differential voltage ±1500V, differential input impedance 2pF || 10MΩ, BNC interface. Click to view the probe manual
DPB5700	High voltage differential probe, 70 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. Click to view the probe manual.
DPB5700A	High voltage differential probe, 100 MHz bandwidth, 100X/1000X attenuation ratio, maximum differential voltage 7000 v, differential input impedance 2.5pF || 40MΩ, BNC interface. Click to view the probe manual
CP4020	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. Click to view the probe manual
CP4050	Current probe, DC-1 MHz bandwidth, 2X/20X attenuation ratio, maximum input 50Arms/140Ap-p, 9V adapter power supply. Click to view the probe manual
CP4070	Current probe, DC-200 kHz bandwidth, attenuation ratio of 20X/200X, maximum input of 20Arms/60Ap-p, 9V adapter for power supply. Click to view the probe manual.
CP4070A	Current probe, DC-300 kHz bandwidth, attenuation ratio of 10X/100X, maximum input of 70Arms/200Ap-p, 9V adapter for power supply. Click to view the probe manual
CP6030	Current probe, DC-50 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. Click to view the probe manual.
CP6030A	Current probe, DC-100 MHz bandwidth, 1X/10X attenuation ratio, maximum input of 30Arms/50Apk, jaw diameter of 5mm, powered by 12V adapter. Click to view the probe manual.
CP6150	Current probe, DC-12 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 150Arms/300Apk, jaw diameter of 20mm, powered by 12V adapter. Click to view the probe manual.
CP6500	Current probe, DC-5 MHz bandwidth, attenuation ratio of 10X/100X, maximum input of 500Arms/750Apk, jaw diameter of 20mm, powered by 12V adapter. Click to view the probe manual.
CPL5100	Current probe, DC-600 kHz bandwidth, attenuation ratio of 10X/100X, current range of 50mA ~ 100Apk, powered by 12V adapter. Click to view the probe manual

Other

Product	Description
STB-3 Demo board	Signals include various sine and square waves, AM, burst, and common serial bus signals.