Siglent SDG7000A Series Arbitrary Waveform Generator

Max Output Frequency
1 GHz

Max Sampling Rate
5 GSa/s

Vertical Resolution
14-bit
 

---

Product Introduction
As a high-performance signal source, SDG7000A series not only inherits all the advantages of SDG6000X series, but also optimizes the user interface and expansibility. Multi-channel synchronous output is supported to meet the synchronous test requirements in different scenarios. Its excellent performance and flexible configuration make it the first choice tool in scientific research and production.

Key Features

• Max Output Frequency 1 GHz
• High-performance sampling system with 5 GSa/s sample rate and 14 -bit vertical resolution
• Dual-channel differential/single-ended output, 16-bit LVDS/LVTTL digital bus outputs (optional)
• Generates vector signals with up to 500 MS/s symbol rate
• The 24 Vpp analog output is superimposed with ± 12 Vdc offset to provide a maximum output range of ± 24 V (48 V)

 

---

Product advantage

Simplify Signal Creation and Accelerate Test
· SDG7000A and SigIQPro signal generation software integrate simulation, design and test to easily meet the needs of users at all stages of design, R&D, and production.
· SigIQPro is a flexible PC-based signal generation software that takes signal generation to a whole new level, supporting Bluetooth, IoT, Custom OFDM, Custom IQ, and in the future, 5G NR, LTE and WLAN, and more.
· SigIQPro is specially developed for easy generation of protocol and modulated signals, with a user interface that supports intuitive operation and provides relevant documentation that makes it easy to create standards-compliant waveforms for a wide range of applications.
· TRY BEFORE YOU BUY! SigIQPro provides 30 free trials of each feature for unrestricted use of the functions with your existing compatible signal generators.
• SigIQPro_UserManual
• Click to view more about SigIQPro signal generation Software
• Click to download SigIQPro signal generation Software

Multi-functional Waveform Generator
SDG7000A series integrates multiple waveform generator functions from DC to continuous waves up to 1 GHz, which can replace RF signal generators in some applications. It adopts Siglent’s TrueArb point-by-point arbitrary waveform generation technology, which enables user-adjustable output sample rates from 0.01 Sa/s to 2.5 GSa/s with excellent jitter performance and the generation of I/Q vector signals with a maximum settable bandwidth greater than 500 MHz. Using the benefits of Siglent’s EasyPulse architecture, a low jitter pulse with a minimum pulse width of 1 ns can be generated.

Wide Range Amplitude Output
24Vpp analog output superimposed with ± 12 Vdc offset, providing a maximum output range of ± 24 V (48 V).

Excellent Arbitrary Waveform Generation
AFG Mode uses traditional DDS technology to generate arbitrary waveforms

AWG Mode uses the innovative TrueArb technology, with an adjustable sample rate from 0.01 Sa/s~ 2.5 GSa/s and jitter less than 20 ps. It not only has all the advantages of traditional DDS technology, but also overcomes its intrinsic jitter and distortion defects.

The flexible platform also provides zero order hold, linear and sinc interpolation methods for increased flexibility when creating complex waveforms.

High-Speed Low Jitter Pulse
Low jitter When a Square/Pulse waveform is generated by traditional DDS, there can be additional jitter if the sample rate is not an integer-related multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.

High speed The minimum 1 ns pulse width, can be generated at any frequency. The pulse width can be finely adjusted in steps of 10 ps.
 

---

Product parameter

Max Output Frequency 1 GHz, 350 MHz, 500 MHz	Sampling Rate 5 GSa/s
Vertical Resolution 14-bit	Waveform Length 512 Mpts
Channels	Continuous waveform Up to 1GHz, supports harmonic generation function
Pulse Min pulse width 1 ns, min. edge 500 ps pulse with low jitter, the rise/fall edge is independently fine adjustable, and the pulse width is fine adjustable	I/O USB 2.0 Host x3, USB 2.0 Device(USBTMC) LAN 10M/100M (VXI-11/Telnet/Socket/WebServer) EXT MOD/CNT, 10MHz In, 10MHz Out, Marker x2, Trigger In/Out
Complex signal generation Supports internal/external modulation, AM, FM, PM, PWM, FSK, PSK, ASK, etc.; Supports sweep; Support burst	Noise Bandwidth 1 mHz ~ 1 GHz adjustable
PRBS Bit rate 2 μbps ~ 625 Mbps, length PRBS3 ~ PRBS32	Vector signal (Optional) 500 MS/s max symbol rate; Carrier DC ~ 1 GHz settable. Includes modulation modes such as ASK, PSK, FSK and QAM. EasyIQ software provides vector signal creation and editing; SigIQPro software provides waveform generation capabilities for Bluetooth's BR, EDR, BLE, IoT's 802.15.4 O-QPSK, SUN FSK, SUN OFDM, ITU-T G.9959, Custom OFDM, and other protocol waveforms
Dual-channel function Inter channel tracking, coupling, and copying. Dual channel superposition function. Supports mutual modulation between channels	Output Range 24 Vpp analog output superimposed ± 12 V DC offset, supports a maximum output range of ± 24 V (48 V)
Digital bus(Optional) 16-bit, LVTTL or LVDS output Bit rate: 1 μbps ~ 1 Gbps

 

---

Models

Models	Max Output Frequency	Sampling Rate	Vertical Resolution	Waveform Length	Channels
SDG7032A	350 MHz	5 GSa/s	14-bit	512 Mpts
SDG7052A	500 MHz	5 GSa/s	14-bit	512 Mpts
SDG7102A	1 GHz	5 GSa/s	14-bit	512 Mpts

 

---

Configure your instrument

Standard Accessories
Universal accessories

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
wireless mouse	A wireless mouse comes standard to help you improve your operating experience.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
BNC Coaxial Cable	Double BNC connector coaxial cable
SDG7000A Quick Start	Quick start operation guide

Optional Accessories
Universal accessories

Product	Description
10M_OCXO_L	OCXO timebase (Assembled and calibrated in factory only) When purchasing, determine whether installation is required.
USB-GPIB Adapter	Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.
SPA1010 Power Amplifier	SPA1010 The power amplifier can be matched with SIGLENT full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator	Used for 20dB attenuation of signal power output by signal source, BNC connector
DIG-LVTTL	Digital bus suite LVTTL, bit rate 1μ~200Mbps
DIG-LVDS	Digital bus suite -LVDS (without RF cable) with bit rate of 1μ~1Gbps.
DIG-LVDS-2	Digital bus suite -LVDS (with 32 RF cables) with bit rate of 1μ~1Gbps.