Siglent SDG3000X Series Function/Arbitrary Waveform Generator
Category: Function/Arbitrary Waveform Generators
Specifications
Details
Siglent SDG3000X Series Function/Arbitrary Waveform Generator
Max Output Frequency
200 MHz
Max sampling rate
1.2 GSa/s
Vertical Resolution
16-bit
Product Introduction
The SDG3000X series dual-channel function/arbitrary waveform generator has a maximum bandwidth of 200MHz, an excellent sampling system specifications of 1.2 GSa/s sampling rate and 16-bit vertical resolution. Based on the traditional DDS technology, it adopts the innovative TrueArb and EasyPulse technologies, which overcome the inherent defects of DDS technology in outputting arbitrary waves and square waves/pulses, and can provide users with high-fidelity, low-jitter signals. In addition, the SDG3000X also provides PRBS pattern generation, sequence, dual pulse, and vector signal output functions to meet a wider range of application needs.
Key Features
Product Advantage
Advanced Arbitrary and Complex Signal Generation
With 196 built-in arbitrary waveforms and a memory depth of up to 40 Mpts per channel, the SDG3000X provides the capacity to store and accurately reproduce complex signals. It also features a flexible sequence mode, allowing users to define playback order and loop counts for each waveform segment—ideal for custom and repetitive test scenarios.
PRBS Signal Output
It supports PRBS signal output up to 120 Mbps, baseband and IF IQ signal generation with symbol rates from 250 to 50 MSymb/s, and a wide range of modulation types including AM, DSB-SC, FM, PM, FSK, ASK, PSK, and PWM. With built-in Sweep and Burst modes, the SDG3000X delivers comprehensive support across a variety of test environments—from education and R&D to industrial power device testing.
Double-Pulse Testing for Power Semiconductors
Double-pulse testing is critical in analyzing the dynamic behavior of power semiconductor devices such as IGBTs and SiC MOSFETs, particularly for evaluating switching losses and conduction characteristics. The SDG3000X offers an ideal platform for this application.
With channel tracking and phase synchronization, users can precisely control pulse widths and timing intervals to simulate realistic switching behavior. Combined with remote control via USB/LAN, and oscilloscope synchronization, the SDG3000X simplifies the creation of automated test systems—enhancing both testing efficiency and data reliability.
High-Fidelity Signal Generation
The SDG3000X EasyPulse technologies is optimized for pulse signal generation. It is capable of producing pulses as narrow as 8 ns with fast rising/falling edges that remain stable across frequency variations. It allows for wide-ranging, fine-grained adjustments of edge timing and pulse width, making it ideal tool for generating high-precision pulse signals.
Precision Signal Output
TrueArb enables point-by-point waveform generation across a sampling range of 10 mSa/s to 600 MSa/s, maintaining waveform integrity while delivering ultra-low jitter (as low as 150 ps) and total harmonic distortion (THD) below 0.075%, ensuring superior signal fidelity.
Intelligent User Experience
Equipped with a 7-inch touchscreen, the SDG3000X allows intuitive parameter settings and signal viewing. It supports MATLAB and Python script import and oscilloscope linkage for automatic calibration. A built-in high-precision frequency counter, along with multiple communication interfaces such as LAN, USB, and GPIB, and a built-in WebServer, ensures easy remote access and synchronization across multiple devices—streamlining workflows and boosting productivity.
Product parameter
Models
Configure your instrument
Standard Accessories
Universal accessories
Optional Accessories
Universal accessories
Options
All options
Max Output Frequency
200 MHz
Max sampling rate
1.2 GSa/s
Vertical Resolution
16-bit
Product Introduction
The SDG3000X series dual-channel function/arbitrary waveform generator has a maximum bandwidth of 200MHz, an excellent sampling system specifications of 1.2 GSa/s sampling rate and 16-bit vertical resolution. Based on the traditional DDS technology, it adopts the innovative TrueArb and EasyPulse technologies, which overcome the inherent defects of DDS technology in outputting arbitrary waves and square waves/pulses, and can provide users with high-fidelity, low-jitter signals. In addition, the SDG3000X also provides PRBS pattern generation, sequence, dual pulse, and vector signal output functions to meet a wider range of application needs.
Key Features
- Dual channels, maximum output frequency 200 MHz, maximum output amplitude 20 Vpp
- 1.2 GSa/s sampling rate, 16-bit vertical resolution
- Supports sequence wave playback function, with a maximum waveform memory of 40 Mpts per channel
- Supports PRBS up to 120 Mbps
- Multi-pulse output function
- Can be used as a noise generator/harmonic generator /IQ signal generator
- 7-inch display touch screen
Product Advantage
Advanced Arbitrary and Complex Signal Generation
With 196 built-in arbitrary waveforms and a memory depth of up to 40 Mpts per channel, the SDG3000X provides the capacity to store and accurately reproduce complex signals. It also features a flexible sequence mode, allowing users to define playback order and loop counts for each waveform segment—ideal for custom and repetitive test scenarios.
PRBS Signal Output
It supports PRBS signal output up to 120 Mbps, baseband and IF IQ signal generation with symbol rates from 250 to 50 MSymb/s, and a wide range of modulation types including AM, DSB-SC, FM, PM, FSK, ASK, PSK, and PWM. With built-in Sweep and Burst modes, the SDG3000X delivers comprehensive support across a variety of test environments—from education and R&D to industrial power device testing.
Double-Pulse Testing for Power Semiconductors
Double-pulse testing is critical in analyzing the dynamic behavior of power semiconductor devices such as IGBTs and SiC MOSFETs, particularly for evaluating switching losses and conduction characteristics. The SDG3000X offers an ideal platform for this application.
With channel tracking and phase synchronization, users can precisely control pulse widths and timing intervals to simulate realistic switching behavior. Combined with remote control via USB/LAN, and oscilloscope synchronization, the SDG3000X simplifies the creation of automated test systems—enhancing both testing efficiency and data reliability.
High-Fidelity Signal Generation
The SDG3000X EasyPulse technologies is optimized for pulse signal generation. It is capable of producing pulses as narrow as 8 ns with fast rising/falling edges that remain stable across frequency variations. It allows for wide-ranging, fine-grained adjustments of edge timing and pulse width, making it ideal tool for generating high-precision pulse signals.
Precision Signal Output
TrueArb enables point-by-point waveform generation across a sampling range of 10 mSa/s to 600 MSa/s, maintaining waveform integrity while delivering ultra-low jitter (as low as 150 ps) and total harmonic distortion (THD) below 0.075%, ensuring superior signal fidelity.
Intelligent User Experience
Equipped with a 7-inch touchscreen, the SDG3000X allows intuitive parameter settings and signal viewing. It supports MATLAB and Python script import and oscilloscope linkage for automatic calibration. A built-in high-precision frequency counter, along with multiple communication interfaces such as LAN, USB, and GPIB, and a built-in WebServer, ensures easy remote access and synchronization across multiple devices—streamlining workflows and boosting productivity.
Product parameter
| Max Output Frequency 160 MHz, 200 MHz, 80 MHz |
Sampling Rate 1.2 GSa/s |
| Vertical Resolution 16-bit |
Waveform Length 40 Mpts |
| Channels 2 |
Models
| Models | Max Output Frequency | Sampling Rate | Vertical Resolution | Waveform Length | Channels |
|---|---|---|---|---|---|
| SDG3202X | 200 MHz | 1.2 GSa/s | 16-bit | 40 Mpts | 2 |
| SDG3162X | 160 MHz | 1.2 GSa/s | 16-bit | 40 Mpts | 2 |
| SDG3082X | 80 MHz | 1.2 GSa/s | 16-bit | 40 Mpts | 2 |
Configure your instrument
Standard Accessories
Universal accessories
| Product | Description |
| Power cord | The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately. |
| USB Cable | USB-A to USB-B. Used to connect instrument to PC for communication. |
| BNC Coaxial Cable | Double BNC connector coaxial cable |
| SDG3000X QuickStart | The product comes standard with a quick guide. |
Optional Accessories
Universal accessories
| Product | Description |
| 20dB Attenuator | Used for 20dB attenuation of signal power output by signal source, BNC connector |
| USB-GPIB Adapter | Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard. |
| BNC Coaxial Cable | Double BNC connector coaxial cable |
| SPA1010 Power Amplifier | SPA1010 The power amplifier can be matched with SIGLENT full series function/arbitrary waveform generator products to realize the power amplification of its signal output. |
Options
All options
| Product | Description |
| SDG-3000X-IQ | SDG3000X IQ generation module (software), which supports baseband or intermediate frequency IQ signals; Support a variety of modulation; Excellent EVM performance can be obtained within the symbol rate of 250 ~ 50m symb/s. |
| SDG-3000X-40MPTS | 40M point waveform storage space to store more complex arbitrary waveforms. |
View more about Siglent SDG3000X Series Function/Arbitrary Waveform Generator on main site