Siglent SDG2000X Series Function/Arbitrary Waveform Generator

Max Output Frequency
120 MHz

Max sampling rate
1.2 GSa/s

Vertical Resolution
16 bit
 

---

Product Introduction
SDG2000X series has a frequency of 120MHz, supports arbitrary wave length up to 8Mpts, and can meet the requirements of waveform generation with high precision and complexity.

Key Features

• Dual-channel, 120 MHz maximum bandwidth
• 1.2 GSa/s Sampling rate, 16 bit vertical resolution
• TrueArb technology, Arbitrary wave length 8 – 8 Mpts
• Low jitter square and pulse wave；Pulse width and rise/fall time finely adjustable

 

---

Product Advantage

Excellent Channel Performance
SDG2000X features high performance dual-channel and high signal fidelity

· Maximum output frequency 120 MHz
· High amplitude output at high frequencies. 20 V signal output capability at 20 MHz
· Extremely low noise floor, high signal to noise ratio


Innovative EasyPulse technology
With traditional DDS technology, there will be a jitter of one sampling period when sampling rate and output frequency are not integer multiple. With EasyPulse technology, this can be solved perfectly. In addition to output low jitter Square and Pulse signals, EasyPulse tech has advantages of：

· Pulse frequency up to 25 MHz
· The rise and fall time can be set separately, fastest 8.4 ns
· Pulse width finely adjustable, down to 16.3 ns
· Duty cycle as low as 0.001%
· Low jitter


TrueArb Technology
TrueArb technology has advantages of low jitter and low distortion over traditional DDS technology. TrueArb technology features by output arbitrary waveforms point by point. It will not leak any waveform info and has other advantages:

· 8 Mpts arbitrary waveform length, keep more details
· 16 bit vertical resolution, higher signal fidelity
· Generate and output arb wave per customer request with standard PC software EasyWave


Complex Signal Generation Capability
The SDG2000X can perform various kinds of modulations, sweeps, burst and signal synthesis. It supports internal, external and manual trigger sources.

· Support AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM modulations
· Support linear and logarithmic sweeps.
· Support “N cycle” and “Gate” burst mode
· Support output combined waveforms of two channels. Combine signals with noise, modulated signal, sweep, burst and arbitrary waveform
· Harmonic function can simulate the synthesis process of signals

 

---

Product parameter

Max Output Frequency 120 MHz, 40 MHz, 80 MHz	Sampling Rate 1.2 GSa/s
Vertical Resolution 16 bit	Waveform Length 8 pts～8 Mpts
Channels 2	Square Frequency 1 μHz ~ 25 MHz
Pulse Frequency 1 μHz ~ 25 MHz	Max.amplitude ±10 V
I/O Standard: USB Host, USB Device、LAN Optional : GPIB (USB-GPIB adapter )	Modulation AM、 FM、PM、FSK、ASK、PSK、DSB-AM、PWM
Display 4.3 inch touch screen, 480 x 272 x RGB	Built-in Frequency Meter Support

 

---

Models

Models	Max Output Frequency	Sampling Rate	Vertical Resolution	Waveform Length	Channels
SDG2122X	120 MHz	1.2 GSa/s	16 bit	8 pts～8 Mpts	2
SDG2082X	80 MHz	1.2 GSa/s	16 bit	8 pts～8 Mpts	2
SDG2042X	40 MHz	1.2 GSa/s	16 bit	8 pts～8 Mpts	2

 

---

Configure your instrument

Standard Accessories
Universal accessories

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
BNC Coaxial Cable	Double BNC connector coaxial cable
SDG2000X Quick Start	Quick-use guide as standard for the instrument.

Optional Accessories
Universal accessories

Product	Description
USB-GPIB Adapter	Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.
SPA1010 Power Amplifier	SPA1010 The power amplifier can be matched with SIGLENT full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator	Used for 20dB attenuation of signal power output by signal source, BNC connector
SDG/SDM-RMK Rack installation	The rack mounting option is designed to mount the instrument to the standard 19-inch rack specified by EIA, and it is compatible with SIGLENT full series SDG function/arbitrary waveform generator and SDM series digital multimeter.