Siglent SDG1000X Series Function/Arbitrary Waveform Generator

Max Output Frequency
60 MHz

Max sampling rate
150 MSa/s

Vertical Resolution
14 bit
 

---

Product Introduction
The SDG1000X series has a frequency as high as 60MHz and a sampling rate of 150 MSa/s, which ensures accurate waveform reproduction. Users can also create complex waveform sequences through the sequence function to meet complex test requirements.

Key Features

• Dual-channel, with maximum 60 MHz Square and Sine wave output frequency
• 150 MSa/s Sampling rate, 14 bit vertical resolution
• TrueArb technology, Arbitrary wave length 2 ~ 16 kpts
• Pulse width and rise/fall time finely adjustable
• Complex signal synthesis
• 4.3” TFT-LCD display

 

---

Product Advantage

High Quality Square Wave
The SDG1000X break the 60 MHz channel bandwidth limit and achieve a high performance square wave with a dedicated square wave generation circuit.

· The SDG1000X series has a bandwidth of 60 MHz, but can output a high-performance square wave of 60 MHz.
· Rise/fall time is less than 4.2 ns
· Square wave has the equivalent jitter performance with pulse wave


Innovative EasyPulse technology
With traditional DDS technology, there will be a jitter of one sampling period when sampling rate and output frequency are not integer multiple. With EasyPulse technology, this can be solved perfectly. In addition to output low jitter Square and Pulse signals, EasyPulse tech has advantages of:

· Pulse frequency up to 12.5 MHz
· The rise and fall time can be set separately, fastest 16.8 ns
· Pulse width finely adjustable, down to 32.6 ns
· Duty cycle as low as 0.001%
· Low jitter


TrueArb Technology
TrueArb technology has advantages of low jitter and low distortion over traditional DDS technology. TrueArb technology features by output arbitrary waveforms point by point. It will not leak any waveform info and has other advantages :

· 16 kpts arbitrary waveform length, keep more details
· 14 bit vertical resolution, higher signal fidelity
· Generate and output arb wave per customer request with standard PC software EasyWave


Complex Signal Generation Capability
The SDG1000X can perform various kinds of modulations, sweeps, burst and signal synthesis. It supports internal, external and manual trigger sources.

· Support AM, FM, PM, FSK, ASK, PSK, DSB-AM and PWM modulations
· Support linear and logarithmic sweeps
· Support “N cycle” and “Gate” burst mode
· Support output combined waveforms of two channels. Combine signals with noise, modulated signal, sweep, burst and arbitrary waveform
· Harmonic function can simulate the synthesis process of signals

 

---

Product parameter

Max Output Frequency 25 MHz, 30 MHz, 60 MHz	Sampling Rate 150 MSa/s
Vertical Resolution 14-bit	Waveform Length 16 kpts
Channels 2	Output Frequency Resolution 1 μHz
Waveform Sine,Square,Ramp,Pulse,Gaussian white noise,196 types of built-in Arb	Max.Amplitude ±10 V
Modulation AM、 FM、PM、FSK、ASK、DSB-AM、PWM、Sweep、Burst	I/O Standard : USB Host, USB Device、LAN Optional : GPIB (USB-GPIB adapter )

 

---

Models

Models	Max Output Frequency	Sampling Rate	Vertical Resolution	Waveform Length	Channels
SDG1032X	30 MHz	150 MSa/s	14-bit	16 kpts	2
SDG1022X	25 MHz	150 MSa/s	14-bit	16 kpts	2
SDG1062X	60 MHz	150 MSa/s	14-bit	16 kpts	2

 

---

Configure your instrument

Standard Accessories
Universal accessories

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
SDG1000X Quick Start	Quick-use guide as standard for the instrument.
BNC Crocodile clip cable	One BNC to alligator clip cable is provided as standard.

Optional Accessories
Universal accessories

Product	Description
USB-GPIB Adapter	Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.
SPA1010 Power Amplifier	SPA1010 The power amplifier can be matched with SIGLENT full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator	Used for 20dB attenuation of signal power output by signal source, BNC connector
BNC Coaxial Cable	Double BNC connector coaxial cable
SDG/SDM-RMK Rack installation	The rack mounting option is designed to mount the instrument to the standard 19-inch rack specified by EIA, and it is compatible with SIGLENT full series SDG function/arbitrary waveform generator and SDM series digital multimeter.