Siglent SDG800 Series Function/Arbitrary Waveform Generator

Max Output Frequency
30 MHz

Max sampling rate
125 MSa/s

Vertical Resolution
14 bit
 

---

Product Introduction
Specially designed for basic laboratories, SDG800 series is favored for its economical price and practical functions. It supports a variety of standard waveforms and simple arbitrary waveform generation, and the frequency is as high as 30 MHz, which can meet the needs of daily teaching and basic scientific research.

Key Features

• Single channel. Maximum output 30 MHz continuous signal.
• 125 MSa/s sampling rate, 14-bit vertical resolution.
• 16 kpts Arbitrary Waveform Length
• Abundant Modulation types: AM\DSB-AM\FM\PM\FSK\ASK\PWM\SWEEP\BURST
• Standard arbitrary waveform editing software.
• 3.5 inch display

 

---

Product Advantage

Multiple Types of Waveform Output
SDG800 supports Sine, Square, Pulse, Triangle, Gaussian White Noise and other waveforms output.

· Sine wave – maximum output frequency 30 MHz
· Square wave characteristics – duty cycle up to 20% -80%; rise time less than 24 ns
· Pulse characteristics – minimum pulse width 48 ns; rise/fall time down to 20 ns
· Triangle wave characteristics – symmetry 0% – 100%
· DC signal – 0 to ±10 V output


Innovative EasyPulse technology
With traditional DDS technology, there will be a jitter of one sampling period when sampling rate and output frequency are not integer multiple. With EasyPulse technology, this can be solved perfectly. In addition to output low jitter Square and Pulse signals, EasyPulse tech has advantages by:

· Pulse frequency up to 5 MHz
· The rise and fall time can be set separately, fastest 20 ns
· Pulse width finely adjustable, down to 48 ns
· Low jitter


Complex Signal Generation Capability
The SDG800 has powerful waveform generation capabilities. It can implement various types of modulations, sweeps, burst output and signal synthesis. It supports internal, external, and manual trigger sources.

· Supports multiple modulations such as AM, FM, PM, FSK, ASK, DSB-AM and PWM
· Support linear and logarithmic sweep mode
· Support “N Cycle” and “Gate” burst mode


Arbitrary Waveform Output
· 16 kpts arbitrary waveform length
· 14 bit vertical resolution
· Built-in 46 kinds of arbitrary waveforms
· Standard powerful arbitrary waveform editing software, equipped with standard waveforms (Sine, Square, Ramp, Pulse, ExpRise, ExpFall, Sinc, Noise and DC) and manual, line, coordinates, formula to create arbitrary waveforms per your needs.

 

---

Product parameter

Max Output Frequency 10 MHz, 30 MHz	Sampling Rate 125 MSa/s
Vertical Resolution 14 bit	Waveform Length 16 kpts
Channels 1	Waveform Sine,Square,Ramp,Pulse,Gaussian white noise,46 types of built-in Arb
Max.Amplitude ±10 V	Dimensions Width×Height×Depth=229 mm×105 mm×281 mm
Output Frequency Resolution 1 μHz	Interface USB Host, USB Device
Modulation AM、 FM、PM、FSK、ASK、DSB-AM、PWM、Sweep、Burst

 

---

Models

Models	Max Output Frequency	Sampling Rate	Vertical Resolution	Waveform Length	Channels
SDG830	30 MHz	125 MSa/s	14 bit	16 kpts	1
SDG810	10 MHz	125 MSa/s	14 bit	16 kpts	1

 

---

Configure your instrument

Standard Accessories
Universal accessories

Product	Description
USB Cable	USB-A to USB-B. Used to connect instrument to PC for communication.
Power cord	The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately.
SDG1000X Quick Start	Quick-use guide as standard for the instrument.
BNC Crocodile clip cable	One BNC to alligator clip cable is provided as standard.

Optional Accessories
Universal accessories

Product	Description
USB-GPIB Adapter	Expand the instrument’s USB interface into a GPIB interface. Using GPIB commands allows for easier execution of various operational tasks. The USB interface adheres to the USB 2.0 specification, while the GPIB interface complies with the IEEE 488.2 standard.
SPA1010 Power Amplifier	SPA1010 The power amplifier can be matched with SIGLENT full series function/arbitrary waveform generator products to realize the power amplification of its signal output.
20dB Attenuator	Used for 20dB attenuation of signal power output by signal source, BNC connector
BNC Coaxial Cable	Double BNC connector coaxial cable
SDG/SDM-RMK Rack installation	The rack mounting option is designed to mount the instrument to the standard 19-inch rack specified by EIA, and it is compatible with SIGLENT full series SDG function/arbitrary waveform generator and SDM series digital multimeter.