Details
Siglent SDL1000X Series Programmable DC Electronic Loads
Max Input
DC 150 V/30 A
Readback resolution
0.1 mV/0.1 mA
Max Input Power
200 W/300 W
Product Introduction
SDL1000X series high-performance programmable electronic loads are specially designed to meet the requirements of high-precision testing. Support DC
150 V/30 A, the maximum total power can reach 300 W/200 W, suitable for a variety of test scenarios. Its core features include adjustable current rising/falling rate as high as 0.001 A/μs~2.5 A/μs, ensuring accurate and fast testing. This series provides four static/dynamic modes (CC/CV/CP/CR), especially continuous, pulse and flip modes in CC dynamic mode, which provides strong support for dynamic testing.
Key Features
Max Input
DC 150 V/30 A
Readback resolution
0.1 mV/0.1 mA
Max Input Power
200 W/300 W
Product Introduction
SDL1000X series high-performance programmable electronic loads are specially designed to meet the requirements of high-precision testing. Support DC
150 V/30 A, the maximum total power can reach 300 W/200 W, suitable for a variety of test scenarios. Its core features include adjustable current rising/falling rate as high as 0.001 A/μs~2.5 A/μs, ensuring accurate and fast testing. This series provides four static/dynamic modes (CC/CV/CP/CR), especially continuous, pulse and flip modes in CC dynamic mode, which provides strong support for dynamic testing.
Key Features
- DC 150 V/30 A, total power up to 300/ 200 W
- Adjustable current rise time range: 0.001 A/us~2.5 A/us
- 4 static modes / Dynamic mode: CC/CV/CR/CP
- Min. readback resolution: 0.1 mV, 0.1 mA
Product Advantage
Excellent Dynamic Characteristics, Can Simulate High-speed Current Changes
The dynamic test function allows the load to switch between the two set parameters according to the set rules, thereby testing the dynamic characteristics of the device under test. The SDL1000X can be set to a maximum frequency of 25 kHz in CC dynamic mode. The current probe can track current changes at high speed and analyze current waveforms. In CV mode, the voltage can be quickly and stably set to test the fast output capability of the power supply. If the instantaneous power exceeds the protection set value, it will enter the hiccup protection state.
Support 50-step Automatic Programming Test
The Program function can simulate multiple tests such as CC, CV, CR, CP, LED, etc. A total of 10 test files can be edited, and each test file supports up to 50 steps.
Support 100-step List Test
The List function supports load-built multi-step, timed, and test environments with different load states. By editing the step values, pulse widths, and slopes of a single step, the load can generate a variety of complex sequence combinations to meet different test needs.
CR-LED Test Function
Based on the traditional CR mode, the SDL1000X adds the turn-on voltage setting of the diode, which can simulate the working state of the real diode and measure the chopping current during the LED test.
Battery Test Function
The battery test function can effectively reflect the reliability and remaining life of the battery. The battery was subjected to a discharge test by setting termination conditions such as termination voltage, discharge capacity, and discharge time using CC, CP, and CR modes.
Product parameter
Models
Configure your instrument
Standard Accessories
Universal accessories
Optional Accessories
Universal accessories
Support 50-step Automatic Programming Test
The Program function can simulate multiple tests such as CC, CV, CR, CP, LED, etc. A total of 10 test files can be edited, and each test file supports up to 50 steps.
Support 100-step List Test
The List function supports load-built multi-step, timed, and test environments with different load states. By editing the step values, pulse widths, and slopes of a single step, the load can generate a variety of complex sequence combinations to meet different test needs.
CR-LED Test Function
Based on the traditional CR mode, the SDL1000X adds the turn-on voltage setting of the diode, which can simulate the working state of the real diode and measure the chopping current during the LED test.
Battery Test Function
The battery test function can effectively reflect the reliability and remaining life of the battery. The battery was subjected to a discharge test by setting termination conditions such as termination voltage, discharge capacity, and discharge time using CC, CP, and CR modes.
Product parameter
| Voltage 150 V |
Current 30 A |
| Total Power 200 W, 300 W |
Adjustable current rise/fall rate 0.001 A/μs ~ 2.5 A/μs |
| Readback Resolution 0.1 mV, 0.1 mA, 1 mV, 1 mA |
Measuring speed 500 kHz |
| Channels 1 |
Output SDL1020X/X-E(Single channel):DC 150 V / 30 A，total power 200 W SDL1030X/X-E(Single channel ):DC 150 V / 30 A，total power 300 W |
| 4 modes CC/CV/CR/CP |
CC Dynamic mode Continuous, pulsed, toggled |
| Frequency(Max.) CC Dynamic mode: 25 kHz CP Dynamic mode:12.5 kHz CV Dynamic mode:0.5 Hz |
Protection Mode OCP, OVP, OPP, OTP and LRV protection |
| Other Function List operation function,Auto-test,Battery discharge function,OCPT/OPPT mode,External analog control |
Display 3.5 inch TFT-LCD display, capable of displaying multiple parameters and states simultaneously |
| I/O Built-in RS232/USB/LAN communication interface, USBGPIB module (optional) |
Models
| Models | Voltage | Current | Total Power | Channels | Readback Resolution | Measuring speed |
|---|---|---|---|---|---|---|
| SDL1020X-E | 150 V | 30 A | 200 W | 1 | 1 mV, 1 mA | 500 kHz |
| SDL1030X-E | 150 V | 30 A | 300 W | 1 | 1 mV, 1 mA | 500 kHz |
| SDL1020X | 150 V | 30 A | 200 W | 1 | 0.1 mV, 0.1 mA | 500 kHz |
| SDL1030X | 150 V | 30 A | 300 W | 1 | 0.1 mV, 0.1 mA | 500 kHz |
Configure your instrument
Standard Accessories
Universal accessories
| Product | Description |
| Power cord | The instrument comes standard with a power cord that conforms to the national standard of the user. Additional power cords in different regions can be purchased separately. |
| USB Cable | USB-A to USB-B. Used to connect instrument to PC for communication. |
| SDL1000X QuickStart | Quick guide for instrument standard |
Optional Accessories
Universal accessories
| Product | Description |
| 30 A Test Lead | 30 A test Lead |
View more about Siglent SDL1000X Series Programmable DC Electronic Loads on main site