HIOKI 9695-03 Clamp On Sensor
For measuring load current, voltage output sensor 100 A AC
 

---

OVERVIEW
 

Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-03 is a 100 A AC clamp sensor with voltage output for measuring load current.

CAT III 300 V

Key Features

• High ±0.3% accuracy
• For inverter devices or commercial power lines
• For power meters and power loggers (may require the 9219)
• Fits in narrow spaces due to compact design

Model No. (Order Code)

9695-03

Clamp On Sensor. For the PW3360/65, 3169, PW3198 and similar products

Note: Supports power quality analyzers, power meters
 

---

SPECIFICATIONS

Basic specifications
Accuracy guaranteed: 1 year
 

Rated measurement current	100 A AC
Max. measurement current	Continuous 130 A (45 to 66 Hz)
Output rate	1 mV AC/ A
Amplitude accuracy (45 to 66 Hz)	±0.3 % rdg. ±0.02 % f.s. (*1)
Phase accuracy	±1° (45 Hz to 5 kHz)
Amplitude frequency characteristics	Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
Max. rated voltage to earth	300 V AC rms or less (Insulated conductor)
Measurable conductor diameter	φ 15 mm (0.59 in) or less
Operating temperature and humidity	0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
Dimensions and mass	50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz) Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter) Option: Connection cable 9219 (3 m, 9.84 ft length)

*1:f.s. is the sensor始s rated primary current value
 

---

OPTIONS

Options (2)

CONNECTION CABLE 9219
Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length

CLAMP SENSOR CABLE 9238
For the 9695, 3 m twisted-pair cable with round clipping terminal