Sonel MMR-650 Winding Resistance and Low Resistance Meter
INDEX CAT. WMGBMMR650
EAN 5907624025042
Ingress protection: IP 67
Measurement category: CAT III 600 V, CAT IV 300 V
Data transmission: LAN, USB, Wi-Fi
Display: touchscreen, graphic, color, backlit Description
Measure winding resistance and low resistance with MMR-650
Ready to work even in extreme conditions, the winding resistance and small resistance meter Sonel MMR-650 has been created to accurately measure small resistances of resistive and inductive objects. The instrument can be used to measure the resistance of both transformer windings - including amorphous-core transformers - and resistive objects. The MMR-650 meter is dedicated to use in power plants, maintenance companies and railway industry, among others.
Product features
measurement of winding resistance (inductive objects including amorphous core transformers)
measurement of very low resistance
transformer core demagnetization function
automatic temperature compensation function (temperature probe)
function of determining the temperature of a motor under load
high immunity to disturbances
Application
The MMR-650 winding resistance and low resistance meter is designed to measure very low very low resistance of both windings - including amorphous core transformers - and resistive objects. This product is made to be used in power plants, railways and maintenance companies to measure resistance of:
windings of power transformers and motors,
breakers, contacts,
earthing conductors, equipotential bondings,
welded and soldered connections,
bolted connections,
and other resistive and inductive objects.
MMR-650 can be also utilized on production lines (eg. at the final production control stage).
Device capabilities
The MMR-650 winding resistance and low resistance meter provides an innovative combination of a high-performance measuring device with a modern user interface and advanced data management system. Wireless data transmission, enhanced system of 2D codes and ability to print labels to identify test items, all contribute to bringing new quality of work and allow the user to perform a wide range of measurements.
Easy readout
The MMR-650 winding resistance and low resistance meter is equipped with a readable colour touchscreen that, due to its 800 x 480 pixel resolution, provides both high comfort of interacting with the interface and high readability of the measurement results.
Durable and practical casing
In response to the customers needs the MMR-650 microohmmeter has been designed to operate in difficult environmental conditions. A unique casing with the IP67 ingress protection rating ensures that the device is both waterproof and dustproof.
Technical data
Range
Resolution
Test current
Accuracy
0…999.9 μΩ
0.1 μΩ
10 A
±(0.2% m.v. + 2 digits)
1.0000…1.9999 mΩ
0.0001 mΩ
10 A
±(0.2% m.v. + 2 digits)
2.000…19.999 mΩ
0.001 mΩ
10 A
±(0.2% m.v. + 2 digits)
20.00…199.99 mΩ
0.01 mΩ
10 A / 1 A
±(0.2% m.v. + 2 digits)
200.0…999.9 mΩ
0.1 mΩ
1 A / 0.1 A
±(0.2% m.v. + 2 digits)
1.0000…1.9999 Ω
0.0001 Ω
1 A / 0.1 A
±(0.2% m.v. + 2 digits)
2.000…19.999 Ω
0.001 Ω
0,1 A
±(0.2% m.v. + 2 digits)
20.00…199.99 Ω
0.01 Ω
10 mA
±(0.2% m.v. + 2 digits)
200.0…1999.9 Ω
0.1 Ω
1 mA
±(0.2% m.v. + 2 digits)
„m.v.” - measured value.
Other technical specification:
insulation typeaccording to EN 61010-1: double
measurement category: III 600 V acc. to EN 61010-2-030:2011
ingress protection according to EN 60529:
with closed housing: IP67
with open housing, powered from the battery pack, installed plugs: IP54
with open housing, powered from mains and/or without plugs: IP40
protection against external voltage: up to 600 V AC for 10 s
power supply to battery charger: 90 V…265 V/50 Hz…60 Hz, 2 A
battery charging time: approximately 3.5 hours
number of measurements (of resistive objects) with 10 A current performed when powered from the: 700…800 depending on the ambient temperature
maximum wire resistance for 10 A current: 300 mΩ
accuracy of measuring current setting: ± 10%
time of performing the resistance measurement:
with selected resistive object type and bidirectional current flow: 3 s
with selected inductive object type, dependent on the resistance and inductance of the object: 5 s or more
